Table of Contents
Advertisement
6 Operation Modes
6.1 Auto Mode
Do display the Auto Mode screen, touch MENU→ AUTO.
■ Checking Status
■ The Status Details Screen
16
The Auto Mode screen consists of the following elements:
Current Auto Mode settings
AUTO ALL
The model setting
TYPE NO.
The status of the main unit (will be either READY,
READY
NO LED, or LED ON)
The LED status (inverted: connected; lit: not
1 2 3 4
connected; flashing: irradiating)
During irradiation, the LED status changes as follows:
Slowly flashing: Normal use at stable temperature
Slightly faster flashing: Temperature at warning
Rapidly flashing: Temperature a t danger level
Temp. error: If the temperature rises roughly 5
To the Menu screen
MENU
On the Auto Mode screen, touch one of the LED numbers (１ ２ ３
４) to view detailed settings for that LED.
The status of the main unit (will be either READY,
READY
e
NO LED, or LED ON)
The LED status (inverted: connected; lit: not
1 2 3 4
connected; flashing: irradiating)
During irradiation, the LED status changes as follows:
Slowly flashing: Normal use at stable temperature
Slightly faster flashing: Temperature at warning
level (when using at higher output)
Rapidly flashing: Temperature a t danger level
(output must be lowered; Warning Screen appears)
Temp. error: If the temperature rises roughly 5
after the alarm display, the LED is shut off due to
temperature error.
STEP 1
First step of irradiation pattern
10.0s
Irradiation time
PWR 100%
Light modulation ratio
BACK
Return to the Auto Mode screen
level (when using at higher output)
(output must be lowered; Warning
Screen appears)
after the alarm display, the LED is shut
off due to temperature error.
o
C
o
C
Advertisement
Table of Contents
