GE LOGIQ E9 User Manual page 229

Declaration of Emissions
Guidance and manufacturer's declaration - electromagnetic emissions
The system is intended for use in the electromagnetic environment specified below. The
user of the system should assure that it is used in such an environment.
Emission Type
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Harmonic
Emissions
IEC 61000-3-2
Voltage
Fluctuations/Flicker
Emissions
IEC 61000-3-3
–
LOGIQ E9 User Guide
Direction 5454884-100 English Rev. 1
This system is suitable for use in the following environment. The
user must assure that it is used only in the electromagnetic
environment as specified.
Table 4-5: Declaration of Emissions
Compliance
Group 1 This system uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Class A This system is suitable for use in all establishments, other than
domestic establishments and those directly connected to the
public low-voltage power supply network that supplies buildings
Class A
used for domestic purposes, provided the following warning is
heeded:
WARNING: This system is intended for use by healthcare
professionals only. This system may cause radio interference or
Complies
may disrupt the operation of nearby equipment. It may be
necessary to take mitigation measures, such as re-orienting or
relocating the system or shielding the location.
Safety Precautions
Electromagnetic Environment
4-27