Table of Contents
Advertisement
Cleaning the reference signal cable
CAUTION:
1. Do not allow the clips to become wet. The ECG tracing will not
be displayed correctly.
2. Do not immerse the connector in water. Wipe the connector with
a dry cloth only. If moisture enters the connector, the system
may fail.
Cleaning the monitor
CAUTION:
1. Do not hit or apply excessive force to the LCD screen during
cleaning. Doing so may damage the monitor.
2. Never use a stiff or hard cloth to clean the monitor.
Doing so may damage the monitor cover or LCD screen.
3. Do not allow liquid droplets to remain on the LCD screen.
The droplets may cause small stains when they dry or may enter
the LCD screen, possibly resulting in failure.
Clean the reference signal cable regularly.
(a) Wipe off any stains using a soft cloth
moistened with mild detergent and then
tightly wrung out.
(b) Wipe the reference signal cable with a dry
cloth and let it dry completely.
(a) Monitor cover
Clean the monitor cover using a soft cloth
moistened with mild detergent.
(b) LCD screen
Use a soft cotton cloth or lens cleaning
paper to clean the LCD screen.
If stains on the LCD screen are difficult to
remove, wipe it gently with a soft cloth
slightly moistened with water and then
wipe it with a soft, dry cloth.
No. 2B771-004EN*M
20-3
Advertisement
Table of Contents
