Unpacking; Hooking Up The System - Sony DVP-S300 Operating Instructions Manual

Getting Started Getting Started

Unpacking

Check that you have the following items:
• Audio/Video/S-link connecting cord (1)
• S video cable (1)
• Remote commander (remote) RMT-D105A (1)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
– on the batteries. When using the remote, point it at
the remote sensor g on the player.
z
You can control Sony TVs and AV receivers using the
supplied remote
See page 30.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
EN
6

Hooking Up the System

Overview
This section describes how to hook up the CD/DVD
player to a TV (with audio/video input jacks) and/or
an amplifier. You cannot connect this player to a TV
without a video input connector. Be sure to turn off
the power of each component before making the
connections.
pTo listen to the sound through TV speakers
CD/DVD player
R–AUDIO 1–L VIDEO 1
R–AUDIO 2–L VIDEO 2
LINE OUT
To AUDIO
OUT
: Signal flow
pTo listen to the sound through speakers connected to
an amplifier (receiver)
CD/DVD player
To
AUDIO
OUT
Amplifier
To audio
(Receiver)
input
: Signal flow
OPTICAL COAXIAL
1
2
PCM/
DOLBY DIGITAL (AC-3)
S VIDEO OUT DIGITAL OUT
To VIDEO
OUT
To an AC outlet
TV
To video
input
To audio
input
To an AC outlet
R–AUDIO 1–L VIDEO 1 OPTICAL COAXIAL
1
2
PCM/
R–AUDIO 2–L VIDEO 2 DOLBY DIGITAL (AC-3)
LINE OUT S VIDEO OUT DIGITAL OUT
To
VIDEO
To an AC
OUT
outlet
TV
To video input
To an AC outlet
To an AC outlet