Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual page 28

K Press X/x to select the item, then press ENTER.
When "NO" or "LINE OUTPUT L/R (AUDIO)" is selected, Quick Setup is finished and
connections are complete.
When "DIGITAL OUTPUT" is selected, the Setup Display for "DOLBY DIGITAL"
appears. Proceed to Step qs.
L Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 24 (
through
Audio Cord Connection Type
B-2
D
qd Press ENTER.
DTS is selected.
qf Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 24 (
through
Audio Cord Connection Type
B-2
A D
qg Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set "MPEG" to "MPEG" (page
62).
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select "QUICK" under SETUP in the Control Menu (page 56).
28
).
A D
AUDIO SETUP
C-2
AUDIO SETUP
).
A D
C-2
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS: DOLBY DIGITAL
You select
D-PCM
DOLBY DIGITAL (only if the
amplifier/receiver has a Dolby
Digital decoder)
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
You select
OFF
ON (only if the amplifier/receiver
has a DTS decoder)
OFF
STANDARD
ON
D-PCM
D-PCM
OFF
STANDARD
ON
D-PCM
PCM
OFF
OFF
ON
B
Page
62
62
B
Page
63
63