Battery Pack - Sony DVP-FX1021 Operating Instructions Manual

Portable cd/dvd player
Hide thumbs Also See for DVP-FX1021:
Table of Contents

Advertisement

Power Connections (continued)
Charging the battery pack
A
1. Attach the battery pack to the player.
2. Connect the AC power adaptor to the player and
then plug into an AC outlet.
Player

Battery Pack

AC adaptor cord insert
jack (DC IN 9.8V)
Charge indicator
When charging starts, "
" appears on the
display window.
3. Disconnect the AC power adaptor from the player
and pull out the plug from the AC outlet after
charging.
When charging is complete, "
the display window.
A
Confirm the battery charge on the unit's display
window
Full
Low
• If using the AC adaptor, battery display does not
appear.
Recharging and play times
A
Recharging
with player
4.8 hours
* When Brightness control is set to "
- using the headphones.
- at room temperature (25°C)
POWER
/HOLD
NOTES:
• Recharging times shown above depend on operating
conditions.
• When the power is ON, you cannot charge the
battery.
• Charge the battery at a temperature of +5°C (+41°F)
to +35°C (+95°F).
" appears on
The charging time may vary, depending on the
surrounding temperature.
• The battery will not be charged when it is naturally or
purposely discharged. Because the unit cannot
perceive battery voltage, even if you attached the
battery.
When you are in this situation, power on the unit and
Recharge
then power off again. Then battery charging will
proceed.
23
Play time (DVD-VIDEO)
LCD On
Approx.
Approx.
7 hours*
b
"(minimum).

Advertisement

Table of Contents
loading

Table of Contents