To Remove The Battery Pack; Checking The Remaining Battery Charge - Sony Cyber-shot 4-170-840-12(1) Instruction Manual

x

To remove the battery pack

Battery eject lever
x
Notes on the multi-connector cover
To open the multi-connector cover, first open the battery/memory card cover.
Then, pull the notch on the left side of the multi-connector cover out with the
fingernail. Close the multi-connector cover firmly, then the battery/memory
card cover.
Multi-connector cover
x

Checking the remaining battery charge

A remaining charge indicator appears on the LCD screen.
High
Notes
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct under certain circumstances.
• When [Power Save] is set to [Standard] or [Stamina], if you do not operate the
camera for a certain period of time while the power is on, the LCD screen becomes
dark, then the camera turns off automatically (Auto power-off function).
• To keep clean battery pack terminal and prevent short-circuiting, place the battery
pack in a plastic bag, etc. when carrying and storing to isolate it from other metal
objects, etc.
Slide the battery eject lever. Be sure not
to drop the battery pack.
Low
GB
19