Sony WEGA KV-36XBR800, WEGA KV-40XBR800 Operating Instructions Manual page 12

Item
1 MEMORY STICK
2 MEMORY STICK LED
3 S VIDEO
VIDEO 2 INPUT
4 VIDEO/L(MONO)-AUDIO-R
VIDEO 2 INPUT
MENU
5
6 V v B b
SELECT
7
8 TV/VIDEO
-VOLUME +
9
-CHANNEL+
0
TIMER LED
qa
qs STAND BY LED
Infrared Receiver (IR)
qd
qf POWER
Description
Memory Stick insertion slot. For details, see "Using the Memory Stick Picture
Viewer" on page 53.
When lit, indicates that the Memory Stick is being read. (Do not remove the
Memory Stick when the indicator is lit.)
Connects to the S VIDEO OUT jack on your camcorder or other video
equipment that has S VIDEO. Provides better picture quality than composite
video (4).
Connects to the composite A/V output jacks on your camcorder or other
video equipment.
Press to display the Menu. Press again to exit from the Menu. For details, see
"Using the Menus" on page 63.
Press V v B b to move the on-screen cursor.
Press to select the on-screen highlighted item.
Press repeatedly to cycle through the video equipment connected to the TV's
video inputs.
Press to adjust the volume.
Press to scan through channels. To scan quickly through channels, press and
CHANNEL
hold down either
When lit, indicates one of the timers is set. When the timer is set, this LED
will remain lit even if the TV is turned off. For details, see page 73.
Blinks when the TV is turned on, then shuts off when the picture is displayed.
If the LED blinks continuously, this may indicate the TV needs service (see
"Contacting Sony" on page 80).
Receives IR signals from the TV's remote control.
Press to turn on and off the TV.
button.
11