How Do I Manually Upgrade The Firmware On My Camera - D-Link DCS-5020L Manual

How do I manually upgrade the firmware on my camera?
10.
Note: All firmware upgrades should be done over a WIRED connecBon. If your camera is
currently configured for wireless, plug it directly into your router before proceeding.
Step 1: Download the latest firmware file for your device from h^ps://www.mydlink.com/
support
Step 2: Open a web browser and enter the IP address of the camera in the address bar
(default is 192.168.0.20). Press Enter.
Step 3: The default username is admin and the password field should be lef blank. Click OK.