Additional Information; Connecting Equipment To The Tv - Sony FD Trinitron WEGA KV-28FQ86B Operating Instructions Manual

Sony wide colour television operating instructions

Hide thumbs Also See for FD Trinitron WEGA KV-28FQ86B:

Service manual (78 pages)

Service manual (24 pages)

Service manual (24 pages)

Table Of Contents

Table of Contents

Connecting Equipment to the TV

• Using the following instructions you can connect a wide range of optional equipment to your TV set.

• Connecting cables are not supplied.

S VHS/Hi8/

DVC

camcorder

• To avoid picture distortion, do not connect external equipment to connectors A and B at the

same time.

• Do not connect a Decoder to the Scart connector F.

• Games that use a "GUN" attachment to point at the screen may not work correctly due to the 100Hz

technology used in this TV.

Connecting a VCR

To connect a VCR, please refer to the section "Connecting the aerial and VCR" of this instruction manual on page 7.

Connecting a VCR that supports SmartLink

SmartLink is a direct link between the TV set and the VCR. For more information on SmartLink, please refer

to the instruction manual of your VCR.

If you use a VCR that supports SmartLink, please connect the VCR to the TV to the Scart connector

using a Scart lead.

If you have connected a decoder or a Set Top Box to the Scart

VCR connected to this Scart

Select the "Manual Programme Preset" option in the "Set Up" menu and after entering in the "Decoder**" option,

select "On" (refer to page 18). Repeat this option for each scrambled signal.

**This option is only available depending on the country you have selected in the "Country" menu.