Step 1: Charging Your Sony Clié Handheld - Sony PEG-T615C CLIE Paint v1.0 Read This First Manual

Step 1: Charging your Sony CLIÉ Handheld
Note
Before you use your CLIÉ handheld for the first time, make sure to charge it.
Connect the supplied cradle to an AC power source in advance.
Charging will start as soon as you place your CLIÉ handheld on the
cradle. The battery icon in the screen changes to the battery charging
icon ( ).
It takes about four hours for your CLIÉ handheld to be fully charged
for the first time. Subsequent charges, if your CLIÉ handheld is
charged frequently, will require less time.
To the wall
outlet
When you place your CLIÉ handheld on the cradle, the cradle
indicator and the LED indicator of your CLIÉ handheld turns on, and
charging starts.
When charging is completed
The LED indicator of your CLIÉ handheld turns off. When you remove
your CLIÉ handheld from the cradle, the battery charging icon changes
to the battery icon (
The cradle indicator remains on even after charging is completed.
Note
If the battery in your CLIÉ handheld is fully discharged, all data stored on
the DRAM (memory) is lost. Performing another HotSync
battery is recharged can restore information saved from the last HotSync
operation.
24
Insert your CLIÉ handheld at an
angle to the cradle and lay it
back to fit into place.
).
®
operation once the