Table of Contents
Advertisement
UP1500 User's Manual
auto_action
bootdef_dev
UP1500 800-A1
Table 4-8
Environment Variable Summary (Continued)
Environment Variable
kbd_hardware_ type
language
os_type
password
pci_parity
pk*0_fast
pk*0_host_id
pk*0_soft_term
tt_allow_login
Specifies the action the SRM Console takes any time the system powers up, fails,
or resets. When the setting involves autoboot, the system boots from the default
boot device specified by the value of the bootdef_dev environment variable.
The syntax is:
set auto_action value
The options for value are show in Table 4-9.
Table 4-9
Auto_Action Values
Option
halt
boot
restart
Note: If a halt assertion exists, the SRM Console ignores the auto_action setting
and halts at the SRM Console.
The bootdef_dev environment variable specifies one or more devices for
booting the operating system. When more than one device is listed, the system
Specifies the default operator console keyboard
type.
Specifies the operator console keyboard layout.
Specifies the operating system. Valid entry is:
unix.
A password stored in the NVRAM used to secure
the operator console.
Disables or enables parity checking on the PCI
bus.
Enables fast SCSI mode.
Specifies the default value for a controller host
bus node ID.
Enables or disables SCSI terminators on systems
that use the QLogic ISP1040 SCSI controller.
Enables or disables login to the SRM Console
firmware on other operator console ports.
Description
The system remains in SRM Console mode after
power-up or a system crash.
The system boots automatically when it is turned on
and halts after a system failure.
The system boots automatically when it is turned
on or after it fails.
Chapter 4 Software Support
Function
4-16
Advertisement
Table of Contents
