Advertisement
19. SCSI VIDEO Connectors (SCSI VIDEO 1-3)
Connects with the SCSI Video Connector of the Hard
Disk Box AY-EB2000 or WJ-EB1000 via the optional
SCSI Cable AY-CA68SR3 for AY-EB2000 or
AY-CA50SR3 for WJ-EB1000.
20. TC (Time Code) IN Connector (TC IN)
Connects with a VTR having LTC time code signal
output connector to improve editing accuracy.
21. TC (Time Code) OUT Connector (TC OUT)
Connects with a VTR having LTC time code signal input
connector.
The signal supplied from this connector is not looped
through.
22. AC Inlet
Connect the AC Power Cord (provided).
23. AUDIO OUT 1/2 Jacks
(AUDIO OUT OUT1, OUT2 L/R)
Supply the audio signals.
24. ADV-REF OUT Connector (ADV-REF OUT)
Supplies the Advance Reference Signal to the VTR
having the time base corrector inside (or AUX video
source).
25. Video Output Connectors
(VIDEO OUT1/OUT2 Y/C, COMPOSITE, Y, P
Supplies the video signal to the monitor or VTR.
26. AUDIO OUT 1/2 Connectors
(BALANCED AUDIO OUT, OUT1/OUT2)
Supply the audio signals.
27. G/L IN / AUTO Connectors (G/L, IN/AUTO)
The gen-lock signal is supplied to these connectors (Be
sure to terminate the video signal output from these
connectors).
By connecting with the G/L AUTO Connector, the video
signal is automatically unterminated.
Caution:
If a gen-lock signal is supplied to the G/L connector
during playback or recording, it may cause the video
to roll or cause other system malfunction.
Stop the playback or recording, then make a
connection to the G/L connector again.
28. AUDIO IN 1/2 Jacks (IN1, IN2 L/R) (Unbalanced)
Accepts the audio signal.
The audio signal supplied to these jacks can be saved in
the Hard Disk Box.
When the audio signal is supplied to the L side only, a
monaural audio signal is made.
29. AUDIO IN 1/2 Connectors
(BALANCED AUDIO IN IN1 L/R, IN2 L/R)
Accepts the audio signal.
The audio signal supplied to these connectors can be
saved in the Hard Disk Box.
30. Video 1/2 Input Connectors
(VIDEO IN1/IN2 Y/C, COMPOSITE, Y, P
Accepts the video signals to be saved in the Hard Disk
Box.
Select the connector, either Composite, Y/C or
Component, according to the type of video signal.
The selection of either Video 1/Video 2 is available on
the PC monitor screen.
31. CONTROL 1/2 Connectors
(CONTROL 1/CONTROL 2) (9-pin)
Supplies the control signal (for the recording or play
back mode) to equipment having an RS-422 Interface
Connector.
Be sure to supply the video signal of the VTR connected
with CONTROL 1 to VIDEO IN 1, and likewise with the
, P
)
VTR connected to CONTROL 2.
B
R
32. JOGPAD Connector (JOGPAD)
Connects with the Jogpad (provided).
33. SCSI AUDIO Connector (SCSI AUDIO)
Supplies the audio signal to the SCSI Audio Connector
of the optional Hard Disk Box via the optional SCSI
Cable AY-CA68SR3 for AY-EB2000 or AY-CA50SR3 for
WJ-EB1000.
3
, P
)
B
R
Advertisement
