Yamaha CS-700 Operation Manual page 93

Property Type
net.dot1x-enabled BOOLEAN
net.dot1x-identity TEXT
net.dot1x- TEXT
password
voip.registrar TEXT
voip.registrar- TEXT
backup
voip.realm TEXT
voip.proxy TEXT
voip.reg-use-proxy INDEXED_
OPTION
voip.user TEXT
voip.password TEXT
voip.id TEXT
voip.name TEXT
Values
0 : Disable 802.1x authentication
1 : Enable 802.1x authentication
username : String.
password : String.
IP address or DNS name.
IP address or DNS name.
Realm string.
IP address or name. Separate
multiple addresses by a comma.
Add ";lr" suffix for loose routing.
0 : No proxy
1 : Outbound only
2 : Acc only
3 : All
SIP username.
SIP user password.
SIP ID.
VoIP Display Name.
Default Value Description
0 Enables 802.1x authentication to access the network. When
enabled, the required MD5 credentials – identity and password -
also need to be specified.
Set a 802.1x authentication identity.
Set a 802.1x authentication password.
The IP address or DNS name of the SIP registrar server. Required
for VoIP call support.
The IP address or DNS name of a failover SIP registrar.
* Realm of the credential to authenticate against the VoIP server.
The value here must match the realm sent by the server in the
WWW-Authenticate or Proxy-Authenticate header in the 401/407
response. An asterisk ('*') causes the endpoint to respond to any
realms.
The outbound SIP proxy server's IP address or name. If there are
multiple SIP proxies, separate the addresses by a comma. Also
note that if the allow strict routing option is set and you have a SIP
proxy that is configured for loose routing, add the designation
after the proxy's address, for example, '10.10.10.10;lr'.
0 Indicates whether the SIP proxy server(s) specified in "proxy"
property should be used when registering. Selecting this option
will add the listed proxy server(s) to the route headers of the SIP
REGISTER request.
SIP username for the account used to authenticate with the SIP
registrar and proxies.
SIP password for the account used to authenticate with the SIP
registrar and proxies.
SIP ID used for SIP registration. If this field is left blank, the
voip.user (User name) field will be used as the ID.
VoIP Display Name. The Display Name is shown when an outbound
call is made. If no Display Name is provided, the User name will be
used. Please note that the IP PBX might override the Display name
sent by the device and replace it with names configured in the Call
Manager.
93