Proprietary items for COVR-3902
Q1: How to setup my COVR-3902?
Method 1: Setup by using a web browser
Step 1: Connect the power adapter to the Covr Router and plug into a power socket. Allow about one
minute to boot up. Once the power LED is green, it's ready. Do not plug the extender yet.
Step 2: You can use either a wired (Ethernet) or wireless (Wi-Fi) connection to set up your Covr Wi-Fi
System.
Step 3: Launch a web browser (such as Internet Explorer) and enter
http://covr.local
or the IP address of
the router (default 192.168.0.1), or http://dlinkrouter.local into the address bar:
3