Scan Tool Output Controls - Horns; Scan Tool Data List - Displays And Gages - Suzuki XL7 2007 Service Manual

Instrument Panel Cluster (IPC)
Scan Tool Output
Control
Lamp and Gauge
Check

Scan Tool Output Controls - Horns

Scan Tool Output
Control
Horn Relay

Scan Tool Data List - Displays and Gages

The scan tool data lists contain all the instrument panel, gages, and console related parameters that are available on
the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location
of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures.
Begin all of the diagnostic procedures with "Diagnostic System Check - Vehicle Diagnostic Information: " in Vehicle
DTC Information.
Use the scan tool data lists only after the following is determined:
• There is no published DTC procedure nor published symptom procedure for the customer concern.
• The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern.
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of
the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values
may reveal the source of the customer concern.
Additional Menu
Selection(s)
The instrument panel cluster (IPC) illuminates the following
indicators when you select ON:
• ABS
• Air Bag
• BRAKE
• Charge
• Fasten Safety Belt
• High Beam
• Liftgate Ajar
• Low Fuel
• Low Oil Pressure
• Low Traction
• Reduced Engine Power
• Security
• Tire Pressure Monitor
• Traction OFF
The IPC drives the following gages to maximum position when you
select ON:
• Engine Coolant Temperature Gage
• Fuel Gage
• Speedometer
• Tachometer
The indicators should stay illuminated and all gages remain at
maximum until commanded OFF. When commanded OFF, the
indicators should turn OFF and all gages should remain at the
minimum position until the test is exited or commanded ON.
Additional Menu
Selection(s)
When commanded, the Body Control Module supplies ground to
Misc. Test energize the Horn Relay. The Horn should sound if equipped with
keyless entry.
Instrumentation / Driver Info. / Horn:
Description
Description
9C-22