Bosch Performance Line User Manual page 34

Operation
- NuVinci pedalling frequency/gear (only for models with a
"NuVinci H|Sync" gear shift): Displaying and setting the
desired pedalling frequency and the gear.
You can access this view directly by pushing the
NOTICE:
button for 1 second.
• Change the desired pedalling frequency or the gear by pushing
the – (minus) or + (plus) button on the control unit.
• To switch from "NuVinci pedalling frequency" to "NuVinci
gear", push the button for 1 second.
• To switch from "NuVinci gear" to "NuVinci pedalling frequency",
briefly push the button.
Resetting the indicators (Reset)
NOTICE: This chapter only applies for "Active or Performance-
Line", if applicable in the optional version "Intuvia eShift".
RESETTING THE distance, cycling time and average:
1. To simultaneously reset the "Distance", "Cycling time" and
"Average", push the button repeatedly until one of these
three views is shown.
2. Push the RESET button until the indicator is set to zero.
This will also reset the values for the two other views. It is not
possible to perform an individual reset.
RESET
Fig.: B-18 Buttons and RESET on the control computer.
Resetting maximum:
1. With the button, switch to the "Maximum" view.
2. Push the RESET button until the indicator is reset to zero.
Resetting the Range:
1. With the button, switch to the "Range" view.
2. Push the RESET button until the indicator is reset to the
factory default value.
34