Using The Rotary Commander - Sony CDX-MP450X Primary User Manual (English, Español, Français) Operating Instructions Manual

Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
(the SOURCE and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
Tuner y CD/MP3
During radio reception, each time you
press (MODE), the band changes as
follows:
FM1 t FM2 t FM3 t AM1 t AM2
By rotating the control
(the SEEK control)
Rotate the control momentarily and
release it to:
•Locate a specific track/file on a disc.
Rotate and hold the control until you
locate the specific point in a track/file,
then release it to start playback.
•Tune in stations automatically. Rotate and
hold the control to find a specific station.
By pushing in and rotating the
control (the FLDR/PRESET control)
Push in and rotate the control to:
•Receive the stations memorized on the
•Select the folder.
(MODE)
Other operations
Rotate the VOL control to
adjust the volume.
Tip
If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for two
seconds to turn off the clock indication after
turning off the engine.
number buttons.
Press (SOUND) to
adjust the sound menu.
Press (DSPL) to display
the band or disc type/file name/
folder name/CD TEXT/clock.
continue to next page t
Press (ATT) to
attenuate the
sound.
Press (OFF) to
turn off the unit.
21