Sony CDX-GT40W Operating Instructions Manual
Sony CDX-GT40W Operating Instructions Manual

Sony CDX-GT40W Operating Instructions Manual

Fm/am compact disc player
Hide thumbs Also See for CDX-GT40W:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

FM/AM
Compact Disc Player
Operating Instructions
Manual de instrucciones
Owner's Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. CDX-GT40W Serial No.
To cancel the demonstration (DEMO) display, see page 9.
Para cancelar la pantalla de demostración (DEMO), consulte la página 11.
CDX-GT40W
© 2005 Sony Corporation
2-653-154-31 (1)
US
ES

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Sony CDX-GT40W

  • Page 1 The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CDX-GT40W Serial No.
  • Page 2 Welcome ! Thank you for purchasing this Sony Compact Disc Player. You can enjoy your drive with the following functions. • CD playback You can play CD-DA (also containing CD TEXT*), CD-R/CD-RW (MP3/WMA files also containing Multi Session (page 12)) and ATRAC CD (ATRAC3 and ATRAC3plus format (page 13)).
  • Page 3: Table Of Contents

    Troubleshooting ..... . . 15 Error displays/Messages....17 SonicStage and its logo are trademarks of Sony Corporation.
  • Page 4: Getting Started

    Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen.
  • Page 5: Attaching The Front Panel

    Attaching the front panel Place the hole A of the front panel onto the spindle B on the unit, then lightly push the left side in. Press (SOURCE) on the unit (or insert a disc) to operate the unit. Note Do not put anything on the inner surface of the front panel.
  • Page 6: Location Of Controls And Basic Operations

    Location of controls and basic operations Main unit Front panel removed RESET Card remote commander RM-X151 SOURCE – DSPL – Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit.
  • Page 7: Source Button

    H GP* /ALBM* +/– buttons* To skip groups/albums (press); skip groups/ albums continuously (press and hold). I SEEK –/+ buttons To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold). Radio: To tune in stations automatically (press);...
  • Page 8: Display Items

    For details on selecting a CD/MD changer, see page 10. Display items A ATRAC CD indication B Source C WMA/MP3/BBE MP indication D Track number/Elapsed playing time, Disc/ artist name, Album/group number* group name, Track name, Text information* Clock *1 Album/group number is displayed only when the album/group is changed.
  • Page 9: Other Functions

    Other functions Changing the sound settings Adjusting the sound characteristics — BAL/FAD/SUB You can adjust the balance, fader, and subwoofer volume. Press the select button repeatedly until “BAL,” “FAD” or “SUB” appears. The item changes as follows: LOW* t MID* t HI* BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*...
  • Page 10: Using Optional Equipment

    A.SCRL (Auto Scroll) To scroll long displayed item automatically when the disc/album/group/track is changed. – “A.SCRL-ON”: to scroll. – “A.SCRL-OFF” ( ): to not scroll. LPF (Low Pass Filter) To select the subwoofer cut-off frequency: “LPF OFF” ( ), “LPF125Hz” or “LPF 78Hz.” * When the unit is turned off.
  • Page 11: Rotary Commander Rm-X4S

    Repeat and shuffle play 1 During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. Select To play REP-DISC* disc repeatedly. SHUF- tracks in the changer in random CHGR* order. SHUF-ALL* tracks in all units in random order.
  • Page 12: Additional Information

    Additional Information Precautions • If your car has been parked in direct sunlight, allow the unit to cool off before operating it. • Power antenna will extend automatically while the unit is operating. Moisture condensation On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit.
  • Page 13: About Atrac Cd

    SonicStage 2.0 or later, or SonicStage Simple Burner 1.0 or 1.1. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer. Maintenance Replacing the lithium battery of the card remote commander Under normal conditions, the battery will last approximately 1 year.
  • Page 14: Removing The Unit

    If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In...
  • Page 15: Troubleshooting

    Fraunhofer IIS and Thomson. Note This unit cannot be connected to a digital preamplifier or an equalizer which is Sony BUS system compatible. Design and specifications are subject to change without notice. • Lead-free solder is used for soldering certain parts.
  • Page 16 The contents of the memory have been erased. • The RESET button has been pressed. t Store again into the memory. • The power connecting lead or battery has been disconnected. • The power connecting lead is not connected properly. Stored stations and correct time are erased.
  • Page 17: Error Displays/Messages

    *2 The disc number of the disc causing the error appears in the display. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began.
  • Page 18 (se vende por separado). Si desea obtener más detalles sobre el módulo de sintonizador de radio por satélite, póngase en contacto con el distribuidor Sony autorizado más cercano. “SAT Radio”, “SAT Radio Ready”, los logotipos de SAT Radio, SAT Radio Ready y todas las marcas relacionadas son marcas comerciales de Sirius Satellite Radio Inc.
  • Page 19 Tabla de contenido Procedimientos iniciales Restauración de la unidad ....4 Ajuste del reloj ......4 Extracción del panel frontal.
  • Page 20: Procedimientos Iniciales

    Procedimientos iniciales Restauración de la unidad Antes de utilizar la unidad por primera vez, o después de sustituir la batería del automóvil o de cambiar las conexiones, debe restaurarla. Extraiga el panel frontal y presione el botón RESET con un objeto puntiagudo, como por ejemplo un bolígrafo.
  • Page 21: Colocación Del Panel Frontal

    Colocación del panel frontal Coloque el orificio A del panel frontal en el eje B de la unidad y, a continuación, presione ligeramente el lado izquierdo hacia adentro. Presione (SOURCE) en la unidad (o inserte un disco) para utilizarla. Nota No coloque nada sobre la superficie interior del panel frontal.
  • Page 22: Ubicación De Los Controles Y Operaciones Básicas

    Ubicación de los controles y operaciones básicas Unidad principal Panel frontal extraído RESET Control remoto de tarjeta RM-X151 SOURCE – DSPL – Consulte las páginas indicadas para obtener información detallada. Los botones correspondientes en el control remoto de tarjeta controlan las mismas funciones que los de la unidad.
  • Page 23 H Botones GP* /ALBM* +/–* Para omitir grupos/álbumes (presionar); para omitir grupos/álbumes en forma continua (mantener presionado). I Botones SEEK –/+ Para omitir pistas (presionar); para omitir pistas en forma continua (presionar y volver a presionar dentro de 1 segundo y mantener); para retroceder o avanzar una pista rápidamente (mantener presionado).
  • Page 24: Elementos De La Pantalla

    Si desea obtener información adicional sobre cómo seleccionar un cambiador de CD/MD, consulte la página 11. Elementos de la pantalla A Indicador de CD de ATRAC B Fuente C Indicador de WMA/MP3/BBE MP D Número de pista/Tiempo de reproducción transcurrido, Nombre del disco/artista, Número del álbum/grupo* álbum/grupo, Nombre de la pista, Información de texto*...
  • Page 25: Radio

    Radio Almacenamiento y recepción de emisoras Precaución Para sintonizar emisoras mientras maneja, utilice la función Memoria de la mejor sintonía (BTM) para evitar accidentes. Almacenamiento automático — BTM Presione (SOURCE) varias veces hasta que aparezca “TUNER”. Para cambiar de banda, presione (MODE) varias veces.
  • Page 26: Otras Funciones

    Otras funciones Cambio de los ajustes de sonido Ajuste de las características del sonido — BAL/FAD/SUB Puede ajustar el balance, el equilibrio y el volumen del altavoz potenciador de graves. Presione el botón de selección varias veces hasta que aparezca “BAL”, “FAD”...
  • Page 27: Uso De Un Equipo Opcional

    CONTRAST Para ajustar el contraste de la pantalla. El nivel de contraste puede ajustarse en 7 pasos. M.DSPL (Desplazamiento de indicaciones) Para seleccionar el modo de desplazamiento de indicaciones. – “M.DSPL-SA” ( ): para mostrar patrones en movimiento y el analizador de espectro. –...
  • Page 28: Mando Rotatorio Rm-X4S

    Omisión de álbumes y discos 1 Durante la reproducción, presione (GP/ALBM) +/–. Presione (GP/ALBM) Para omitir álbumes y suéltelo (manténgalo presionado durante un momento). álbumes en a los 2 segundos de haberlo forma continua soltado por primera vez. discos varias veces. discos en forma y, a continuación, vuelva a continua...
  • Page 29: Información Complementaria

    Información complementaria Precauciones • Si estaciona el automóvil bajo la luz directa del sol, deje que la unidad se enfríe antes de usarla. • La antena motorizada se extenderá automáticamente mientras la unidad se encuentra en funcionamiento. Condensación de humedad En días lluviosos o en zonas muy húmedas, es posible que se condense humedad en el interior de las lentes y la pantalla de la unidad.
  • Page 30: Acerca De Los Cd De Atrac

    Si desea realizar alguna consulta o solucionar algún problema relativo a la unidad que no se trate en este manual, póngase en contacto con el distribuidor Sony más cercano. Mantenimiento Sustitución de la pila de litio del control remoto de tarjeta En condiciones normales, la pila dura aproximadamente 1 año (la duración puede ser...
  • Page 31: Extracción De La Unidad

    En tal caso, consulte con el distribuidor Sony más cercano. Limpieza de los conectores Es posible que la unidad no funcione correctamente si los conectores entre ésta y el panel frontal están sucios.
  • Page 32: Especificaciones

    Nota Esta unidad no puede conectarse a un preamplificador digital ni a un ecualizador que sea compatible con el sistema BUS de Sony. El diseño y las especificaciones están sujetos a cambios sin previo aviso. • Se ha utilizado soldadura sin plomo para soldar ciertos componentes.
  • Page 33 • El cambiador de CD no es compatible con el formato del disco (MP3/WMA/CD de ATRAC). t Lleve a cabo la reproducción con un cambiador de CD de Sony compatible con MP3 o con esta unidad. No se escuchan pitidos.
  • Page 34: Mensajes/Indicaciones De Error

    *2 La pantalla muestra el número del disco que causa el error. Si estas soluciones no ayudan a mejorar la situación, póngase en contacto con el distribuidor Sony más cercano. Si entrega la unidad para su reparación a causa de problemas en la reproducción de CD, lleve el disco...
  • Page 36 If you have any questions/problems regarding this product, try the following: Read Troubleshooting in these Operating Instructions. Reset the unit. Note: Stored data may be erased. Please contact (U.S.A. only); Call Sony Corporation Printed in Thailand 1-800-222-7669 http://www.SONY.com...

Table of Contents