Ptime; Mwi - Yamaha CS-700 Series Integrators Reference Manual

get codec5
val codec5 5
set codec5 5
notify voip.codec5 5
Supported Products: CS700-SP
Available in API Version: 1.1

ptime

Description: The ptime (packetization interval) value for a codec determines the length of time in
milliseconds represented by the media in an RTP packet which is used to transmit audio
traffic.
Property Actions: set, get, notify
Default Value: 20
Command Definition:
Action Definition
get get ptime
response
val ptime <10..60>
set
set ptime <10..60>
notify notify voip.ptime <10..60>
Parameters:
Parameter Description
10..60
ptime interval in 10 ms increments
CLI Format Examples:
get ptime
val ptime 20
set ptime 20
notify voip.ptime 20
Supported Products: CS700-SP
Available in API Version: 1.1

mwi

Description: Enable displaying the message waiting indicator (MWI) on the device and enable receiving
message waiting notifications from the PBX. The PBX must be configured to support voice
mail for the registered user in order for this feature to work properly.
Property Actions: set, get, notify
Yamaha CS-700 Integrators Reference Guide 127