Managing Key Assignments - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
press the right soft key to move the cursor
6. Enter the messages using the procedure in Program
Station Names (above) and press the right soft key to
return to step 2
7. Press TRSF to store and exit programming
OR press SPK to store and advance to the next
program

3.13 MANAGING KEY ASSIGNMENTS

You can view station key assignments and add extenders to some of the programmable
keys for easy one-touch operation of frequently-used features.
An extender is a number that makes an otherwise general soft key very specific. Adding
the digit 4 to a PAGE key defines this key for paging zone four. Adding 205 to a directed
pickup key defines this key as pickup for extension 205 only. The soft key must already be
assigned by the installing technician. Adding extenders allows one-touch operation for that
feature.
Use this program to assign extenders to the following soft keys:
KEY EXTENDER
BOSS
DP
DS
FWD
GPIK
IOG
MMPG
PAGE
SPD
PSMG
DIR
SP
PROGRAM KEYS
UP & DOWN
KEYPAD
HOLD
Open customer programming and follow the instructions below.
Boss and Secretary (1-4)
Direct Pickup (telephone no.)
Direct Station Select (station no.)
Call Forward (0-5)
Group Pick-Up (01-08)
In/Out of Group (500-509)
Meet Me Page (0-5,
Q
Page (0-5, )
Speed Dial (00-49, 500-799)
Programmed Message (01-20)
SYS(0), PERS(1) or STN(2)
UCD Supervise (UCD group no.)
Select the extension number.
Used to enter extender codes.
Used to clear the displayed data.
3 - 12
System Administration and Special Features Guide
[205] ALM REM (2)
TAKE MEDICATION
Q
)
February, 1999