NEC Electra Elite IPK II General Description Manual page 92

Document Revision 1
This feature is available between Electra Elite IPK II systems and NEAX PBX
systems. When connecting to a NEAX system, IPT cards are used and must be
installed.
The following K-CCIS features are available with the IP (K-CCIS) to NEAX
(Point-to-Multipoint) feature:
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
∗
Not supported with NEAX PBXs.
K - C C I S - T 1
Key-Common Channel Interoffice Signaling (K-CCIS) allows multiple systems to be
connected together to provide additional feature compatibility, above what normal Tie
Lines provide. The system is configured with the 24-channel Digital Trunk Interface
(DTI), a Common Channel Handler (CCH) for receiving or transmitting common
2 - 46
Call Forwarding – All Calls - K-CCIS
Call Forwarding – Busy/No Answer - K-CCIS
Call Transfer – All Calls - K-CCIS
Calling Name Display - K-CCIS
Calling Number Display - K-CCIS
Centralized Billing - K-CCIS
Centralized BLF (K-CCIS)
Centralized Day/Night Mode Change (K-CCIS)
Dial Access to Attendant (K-CCIS)
Direct Inward Dialing - K-CCIS
Dual Hold - K-CCIS
Elapsed Time Display - K-CCIS
Flexible Numbering of Stations - K-CCIS
Hands-Free Answerback - K-CCIS
Hot Line - K-CCIS
Link Reconnect - K-CCIS
Multiple Call Forwarding – All Calls - K-CCIS
Multiple Call Forwarding – Busy/No Answer - K-CCIS
Paging Access - K-CCIS
Station-to-Station Calling - K-CCIS
Uniform Numbering Plan - K-CCIS
Voice Call - K-CCIS
Voice Mail Integration - K-CCIS
∗
Electra Elite IPK II
Features