Apply Position Information To The Images Using "Gps Image Tracker - Sony GPS-CS1KASP Operating Instructions Manual

Apply position information to the
images using "GPS Image Tracker"
Connect the unit to the computer, launch the supplied software, "GPS
Image Tracker", and import GPS log files to the computer. You can then
apply the position information to the imported images.
Before operating "GPS Image Tracker", import the recorded images to
•
the computer using the supplied software "Picture Motion Browser".
For details on the procedure to import images from the camera to the
computer, refer to the instruction manual supplied with the camera.
Select [Help] t [About Picture Motion Browser] t [Supported
•
Formats] from the menu bar of "Picture Motion Browser" to check the
available types of the movie files.
For details on "GPS Image Tracker", refer to its help files (
•
When connecting the unit to the computer, it does not need a battery as
•
the power is supplied from the computer.
1
Launch "GPS Image Tracker".
Double-click [
Or, from the Start menu: Click [Start] t [All Programs] (for Windows 2000,
[Programs]) t [Sony Picture Utility] t [GPS Image Tracker].
2
Connect the unit to the computer.
Pull out the jack cover as illustrated in the following and connect the unit with
the GPS log files to the computer using the supplied USB cable.
] (GPS Image Tracker) on the desktop.
).
Using the software
GB
GB
35