Table of Contents
Advertisement
Base setting
To set base melody(1-9
melody)
Select <Ringer setting> under
BASE mode
Select <Ringer Melody> under
Ringer Settings
Press LEFT and UP/DOWN
button to set the melody you
Prefer;
Press LEFT key to confirm
To set base volume(0-4 volume
level)
Select <Ringer Settings> under
BASE mode
Select <Ringer volume> under
Ringer Settings
Press LEFT key and UP/DOWN
button to set the volume you
like
Press LEFT key to confirm
...........................................................................
...........................................................................
Default PIN is 0000
To set Flash time
You can change flash time to
short or long
Select <Diall Settings> under
BASE mode
Select<Flash time> under Dial
Settings
Press LEFT key and UP/DOWN
button to change Flash time to
long or short
Press LEFT key to confirm
To set dial mode
To set Auto Pause
You can change dial mode to
When you call a number with a
Tone or Pause dialing.
pause, the phone waits a few
seconds before transmitting the
next digits in the dialing sequence.
This is useful when you have to
dial a number for access an
outside line, or for going into a
voicemail system. You are allowed
to set one number in Auto Pause.
Select<Dial Settings> under
BASE mode.
Select<Auto Pause> under
Dial Settings
Press LEFT key, then key in
PIN
Press LEFT key, the display
show Number1
Press LEFT key, then key in
the number you want to set
auto pause
Press LEFT key to confirm
Select <Dial settings> under
BASE mode.
Select<Dial mode> under Dial
settings
Press LEFT key and UP/DOWN
button to change dial mode as
TONE or PULSE
Press LEFT key to confirm
Page 14
Advertisement
Table of Contents
