LED Blinks Twice Every 5 Seconds
Check for 24V on jumper JS7455
or on connector AP5 pins 1-8.
Yes
24V OK?
Confirm that the Inverter_SOS
No
signal on pin 2 of connector A5 is
Active High prior to changing the
Unplug connector AP5 and measure
LCD Panel. Use a Peak Hold
for 24V on jumper JS7455 or on
Voltmeter for measurement.
connector AP5 pins 1-8.
No
24V OK?
Change the P-board.
END
Refer to AP Board test point locations
Refer to AP Board test point locations
Slide 13
Slide 13
29