Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual page 109

Error message
File Damaged
Format Error
Process Error
Memory Card Error
Set Clock
Empty Folder
Same File Name Exists
No Entry
No T-MARK(Track Mark)
No Memory Card
File Protected
Cause/Remedy
• You cannot play or edit tracks, because the data of the selected file
is damaged.
• The PCM recorder has been formatted using a computer. You
cannot perform operations, including recording or playing,
because there is no copy of the control file required for operation.
Format the PCM recorder using the formatting function in the
menu.
• The PCM recorder failed in memory access. Remove and then re-
insert the batteries.
• Save a backup copy of your data and format the PCM recorder
using the menu.
• An error occurred while a memory card was being inserted into
the memory card slot. Remove and try inserting it again. If this
message persists, use a new memory card.
• Set the clock.
• The selected folder does not have any tracks.
• A track of the same file name already exists in the destination
folder when a file is named or copied to the other memory media.
• There are no tracks with "TAKE" or "KEEP" attached to their
file names.
• There are no track marks when you attempt to delete or locate a
track mark.
• There is no memory card inserted into the memory card slot when
you attempt to set the "Memory" or "Cross-Memory Recording"
menus.
• The selected track is protected or is a "Read only" file. You
cannot delete it. You can release the "Read only" attribute using
the PCM recorder.
109 GB