Table of Contents
Advertisement
To charge the battery pack using only
the AC Adaptor
Slide the POWER switch to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.
POWER switch
With the v mark
on the right
Available running time for the
supplied battery pack
Charging time:
Approximate time (min.) required when
you fully charge a completely exhausted
battery pack.
Recording/Playback time:
Approximate time (min.) available when
you use a fully charged battery pack.
"HD" stands for high definition image
quality, and "SD" stands for standard image
quality.
NP-FH60:
Charging time
Recording time*
Continuous
recording
time
Typical
recording
time*
5
Playback
time*
2
10
DC IN jack
DC plug
Open the jack
cover.
(Unit:min.)
HDR-SR7/
HDR-SR5
SR8
HD
SD
HD
135
135
1
90*
2
100*
115*
2
2
90*
3
105*
125*
3
3
90*
4
45*
2
50*
55*
2
2
45*
3
50*
60*
3
3
45*
4
145
165
140
*
1
All times of image quality measured with SP
recording mode when [
to [OFF].
*
2
When the LCD backlight turns on.
*
3
When the LCD backlight turns off.
*
4
When recording with the viewfinder while the
LCD panel is closed.
*
5
Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder or the Handycam
Station, even when the power cord is
disconnected from the wall outlet.
On the charging/recording/playback time
• Times measured when using the camcorder at
25°C (77°F) (10°C to 30°C (50°F to 86°F) is
recommended).
• The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
• The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
On the AC Adaptor
• Use the nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.
SD
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
100*
2
objects. This may cause a malfunction.
105*
3
• Even if your camcorder is turned off, AC power
105*
4
(house current) is still supplied to it while
50*
2
connected to the wall outlet via the AC Adaptor.
50*
3
50*
4
160
INDEX SET] is set
(Still) lamp (p. 11).
Hide quick links:
Advertisement
Table of Contents
