Sony HANDYCAM DCR-SR40 Handbook page 84

• When you play back a created DVD, the ending
of each movie pauses for a few seconds. However,
when you make the Seamless playback setting
with ImageMixer Menu, the ending of each movie
does not pause. Before connecting the camcorder
to a computer via USB, refer to "Setting Seamless
playback"(p.86).
1
Confirm that the Handycam
Station is not connected to a
computer.
2
Turn on the computer.
• Close all applications running on the
computer.
3
Place the recordable DVD to be
saved on the disc drive of your
computer.
• It is recommended that you use a new
recordable DVD.
• If any software starts on the computer
automatically, close it.
4
Connect the Handycam Station to
the wall outlet using the supplied
AC Adaptor.
5
Set the camcorder onto the
Handycam Station, then slide the
POWER switch to turn on.
• When you set the camcorder onto the
Handycam Station, connect securely onto the
interface connector of the Handycam Station
(p.76).
• You can perform this operation, when
whichever position of the
(Still) /
84
(Movie) /
(PLAY/EDIT) is lit.
6
Press the DVD BURN button on the
Handycam Station.
[Check the connected device.] appears on
the LCD screen of the camcorder.
7
Connect the
Handycam Station to a computer
using the supplied USB cable.
DVD creation starts up.
• During DVD creation, do not apply vibration.
The DVD creation may be terminated.
• When you insert a burned DVD-RW/
DVD+RW in the disc drive in step 3, a
message appears, asking if you want to delete
images saved on a DVD.
• Make sure no other USB devices are
connected to your computer.
(USB) jack of the