Changing File Settings; Saving File Settings - Sony DSR-370K1 Operating Instructions Manual

Setup Files

Changing File Settings

When using advanced menu page 11 or 12 (page 10 or
11 on the DSR-370/370P), you can change the settings
about picture quality in setup files. (In basic menu
page 1, a part of items are changeable.)
The changes are accepted only until another file is
called up, after which the original settings are restored.
If you save the changes, store the modified file as one
of the user files or record it in a cassette. (See the
following section "Saving File Settings".)
1
Perform the steps described in "To call up files
recorded onto a tape" on page 109 to call up the
selected file.
2
Access advanced menu page 11 or 12 (page 10 or
11 on the DSR-370/370P).
(The following figure shows an example for the
DSR-570WS/570WSP.)
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
3
Make the desired changes.
Page 11 (page 10 on DSR-370/370P)
Item
M.BLACK, STRETCH and
DTL LEV
M.GAMMA
Adjusts the gamma curve.
V DTL LEV
Adjusts the vertical detail.
DTL FREQ
Adjusts the central frequency
of the detail.
110
Chapter 4 Viewfinder Screen Indications and Menus
Currently
selected file a)
Currently
selected file a)
Settings
See "Basic menu page 1"
(page 92).
–99 to ±0 (normal value) to
+99
–99 to ±0 (normal value) to
+99
LL, L, M (normal value), H,
HH
Page 12 (page 11 on DSR-370/370P)
Item
SAT
Adjusts the saturation of the
image.
HUE
Adjusts the hue of the
image.
SKIN SAT
Adjusts the saturation in the
specified area of the image.
SKIN HUE
Adjusts the hue in the
specified area of the image.

Saving File Settings

Files whose settings have been changed for certain
shooting conditions can be saved as a user file or onto
a tape.
For details, see "To save setup files to a tape" (page 111).
1
Set the SETUP switch to FILE.
2
Call up a setup file whose settings approximate the
desired shooting conditions and then change some
of the settings.
For details of this operation, see "Calling up a Setup
File" (page 108), "Changing File Settings" above,
"Viewfinder Basic Menu" (pages 92 to 97), and
"Viewfinder Advanced Menu" (pages 98 to 106).
Settings
–99 to ±0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
–99 to ±0 (normal value) to
+99
–99 to ±0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
–99 to ±0 (normal value) to
+99
SETUP switch