Page 1: Digital Video Camera
Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DCR-TRV Serial No.
Page 2: Memory Stick
Congratulations on your purchase of this Sony Handycam. With your Handycam, you can capture life’s precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come.
Page 3: Declaration Of Conformity
For customers in the U.S.A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222- SONY (7669) The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No.:...
Page 4: Main Features
Main Features Recording moving pictures or still images, and playing them back •Viewing moving pictures recorded on the tape using the USB cable (p. 150) •Viewing images recorded on the “Memory Stick” using the USB cable (p. 157, 162) •Capturing images on the computer from your camcorder using the USB cable (p.
Page 5 Main Features Accessing the Internet using USB HOST (DCR-TRV39 only) Other uses Functions for adjusting exposure during recording •Back light function (p. 33) •NightShot/Super NightShot/Color Slow Shutter (p. 33) •PROGRAM AE (p. 58) •Manual exposure (p. 60) •Flexible Spot Meter (p. 61) Functions for giving images more impact •Digital zoom (p.
Page 6: Table Of Contents
Table of contents Main Features Quick Start Guide – Recording on tape ... 8 – Recording on “Memory Stick” ... 10 Getting Started Using this manual ... 12 Checking supplied accessories ... 14 Step 1 Preparing the power source ... 15 Installing the battery pack ...
Page 7 Table of contents Superimposing a still image in “Memory Stick” on an image – MEMORY MIX ... 112 Interval Photo Recording ... 115 Recording moving pictures on “Memory Stick” – MPEG MOVIE recording ... 116 Self-timer recording ... 118 Recording a picture from tape as a moving picture ...
Page 8: Recording On Tape
Quick Start Guide – Recording on tape Connecting the power cord Use the battery pack when using your camcorder outdoors (p. 15). Open the DC IN jack cover. AC Adaptor (supplied) Inserting the cassette Slide OPEN/ EJECT in the direction of the arrow and open the lid.
Page 9: Recording A Picture On The Tape
Recording a picture on the tape Remove the lens cap. Press OPEN to open the LCD panel. The picture appears on the screen. Viewfinder When the LCD panel is closed, use the viewfinder with your eye against the eyecup. Adjust the viewfinder lens to your eyesight (p.
Page 10: Recording On "Memory Stick
Quick Start Guide – Recording on “Memory Stick” Connecting the power cord Use the battery pack when using your camcorder outdoors (p. 15). AC Adaptor (supplied) Inserting the “Memory Stick” Insert the “Memory Stick” in the “Memory Stick” slot as far as it can go with the B mark facing up as illustrated.
Page 11: Recording Still Images On The "Memory Stick
Recording still images on the “Memory Stick” Remove the lens cap (p. 26). Press OPEN to open the LCD panel. The picture appears on the screen. Viewfinder When the LCD panel is closed, use the viewfinder with your eye against the eyecup. Adjust the viewfinder lens to your eyesight (p.
Page 12: Getting Started
Using this manual The instructions in this manual are for the two models listed in the table below. Before you start reading this manual and operating your camcorder, check the model number by looking at the bottom of your camcorder. The DCR-TRV39 is the model used for illustration purposes.
Page 13: Precautions On Camcorder Care
Using this manual Note on connecting to other devices If you connect your camcorder to a VCR or computer using the USB cable or the i.LINK cable, make sure that the jack is connected in the right direction. Pushing it forcibly may damage the jack or cause your camcorder to malfunction.
Page 14: Checking Supplied Accessories
Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 1 AC-L15A/L15B AC Adaptor (1), Power cord (1) (p. 16) 2 NP-FM30 rechargeable battery pack (1) (p. 15, 16) 3 A/V connecting cable (1) (p. 43) 4 Wireless Remote Commander (1) (p.
Page 15: Step 1 Preparing The Power Source
Step 1 Preparing the power source Installing the battery pack (1) Lift up the viewfinder. (2) Slide the battery pack down until it clicks. To remove the battery pack (1) Lift up the viewfinder. (2) Slide the battery pack out in the direction of the arrow while pressing BATT down.
Page 16: Charging The Battery Pack
Step 1 Preparing the power source Charging the battery pack Use the battery pack after charging it for your camcorder. Your camcorder operates only with the “InfoLITHIUM” battery pack (M series). See page 192 for details of “InfoLITHIUM” battery pack. (1) Install the battery pack on your camcorder.
Page 17: Charging Time
Step 1 Preparing the power source Note Prevent metallic objects from coming into contact with the metal parts of the DC plug of the AC Adaptor. This may cause a short-circuit, damaging the AC Adaptor. When you use the AC Adaptor Place the AC Adaptor near a wall outlet.
Page 18: Playing Time
Step 1 Preparing the power source DCR-TRV39 Battery pack NP-FM30 (supplied) NP-FM50 NP-FM70 NP-QM71/QM71D NP-FM91/QM91/QM91D Approximate minutes when you use a fully charged battery pack * Approximate number of minutes when recording while you repeat recording start/ stop, zooming and turning the power on/off. The actual battery life may be shorter. Playing time Battery pack NP-FM30 (supplied)
Page 19 Step 1 Preparing the power source Checking status of battery pack – Battery Info (1) Set the POWER switch to OFF (CHG). (2) Press OPEN to open the LCD panel. (3) Press DISPLAY/BATTERY INFO. The battery charge level (the percentage of remaining battery time) and remaining battery time when using the LCD screen or viewfinder are displayed for about seven seconds.
Page 20: Connecting To A Wall Outlet
Step 1 Preparing the power source Connecting to a wall outlet Connect in the same way as when charging the battery pack (p. 16). PRECAUTION The set is not disconnected from the AC power source (house current) as long as it is connected to the wall outlet, even if the set itself has been turned off.
Page 21: Step 2 Setting The Date And Time
Step 2 Setting the date and time Set the date and time when you use your camcorder for the first time. The “CLOCK SET” indicator will appear each time you set the POWER switch to CAMERA or MEMORY unless you set the date and time settings. If you do not set the date and time, “--- -- ----”...
Page 22 Step 2 Setting the date and time To return to FN (Function) Press EXIT. When using your camcorder abroad Set the clock to the local time (p. 23). If you use your camcorder in an area where daylight saving time is used Set DST SET in to ON in the menu settings.
Page 23: Simple Setting Of Clock By Time Difference
Step 2 Setting the date and time Simple setting of clock by time difference You can easily set the clock to the local time by setting a time difference. Select AREA SET and DST SET* in See page 176 for details. * Instead of DST, SUMMERTIME is displayed on the screen for some models.
Page 24: Step 3 Using The Touch Panel
Step 3 Using the touch panel Your camcorder has operation buttons on the LCD screen. Touch the LCD screen directly with your finger or the supplied stylus (DCR-TRV39 only) to operate each function. (1) Press OPEN to open the LCD panel. (2) Set the POWER switch to CAMERA to record, VCR to play back or MEMORY to use the “Memory Stick.”...
Page 25 Step 3 Using the touch panel Operation buttons on each display When the POWER switch is set to CAMERA PAGE1 SPOT FOCUS, MENU, FADER, END SCH, SPOT METER, EXPOSURE PAGE2 SELFTIMER, DIG EFFT, LCD BRT, VOL, MEM MIX PAGE3 SUPER NS, COLOR SLW S When the POWER switch is set to VCR PAGE1 MENU, LCD BRT, VOL, END SCH...
Page 26: Recording - Basics
Recording a picture See relevant “Step 1” and “Step 2.” (1) Remove the lens cap and pull the lens cap string to fix it. (2) Prepare the power source (p. 15 to 20) and insert the cassette (p. 8). (3) Set the POWER switch to CAMERA while pressing the small green button. This sets your camcorder to standby.
Page 27 Recording a picture Note on recording Your camcorder records and plays back in the SP (standard play) mode and in the LP (long play) mode. Select SP or LP in the menu settings (p. 174). In the LP mode, you can record 1.5 times as long as in the SP mode.
Page 28: Indicators Displayed During Recording
Recording a picture Indicators displayed during recording Indicators are not recorded on the tape. JUL 4 2003 Remaining battery time indicator during recording The remaining battery time indicator roughly indicates the continuous recording time. The indicator may not be correct, depending on the conditions in which you are recording.
Page 29: Adjusting The Lcd Screen
Recording a picture After recording (1) Set the POWER switch to OFF (CHG). (2) Close the LCD panel. (3) Eject the cassette. (4) Remove the power source. Adjusting the LCD screen When you adjust the LCD panel, make sure if the LCD panel is opened up to 90 degrees.
Page 30: Adjusting The Brightness Of The Lcd Screen
Recording a picture Shooting with the mirror mode This feature allows the camera subject to view him-or herself on the LCD screen. The subject uses this feature to check his or her own image on the LCD screen while you look at the subject in the viewfinder.
Page 31: Adjusting The Viewfinder
Recording a picture Adjusting the viewfinder If you record pictures with the LCD panel closed, check the picture with the viewfinder. Adjust the viewfinder lens to your eyesight so that the images in the viewfinder come into sharp focus. Lift up the viewfinder and move the viewfinder lens adjustment lever. Viewfinder backlight You can change the brightness of the backlight.
Page 32: Digital Zoom (P
Recording a picture Using the zoom feature Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom sparingly results in better-looking recordings. W : Wide-angle (subject appears farther away) T : Telephoto (subject appears closer) To use zoom greater than 10 Zoom greater than 10 is performed digitally.
Page 33: Shooting Backlit Subjects - Back Light Function
Recording a picture Shooting backlit subjects – Back light function When you shoot a subject with the light source behind the subject or a subject with a light background, use the back light function. (1) Set the POWER switch to CAMERA or MEMORY. (2) Press BACK LIGHT.
Page 34: Using The Nightshot Light
Recording a picture Using Super NightShot Super NightShot makes subjects more than 16 times brighter than those recorded in NightShot. (1) Set the POWER switch to CAMERA. (2) Slide NIGHTSHOT to ON. (3) Press FN and select PAGE3. (4) Press SUPER NS. (5) Press EXIT to return to FN.
Page 35 Recording a picture While using Super NightShot, you cannot use the following functions: – White balance – Fader – Digital effect – PROGRAM AE – Manual exposure – Flexible Spot Meter When the POWER switch is set to MEMORY You cannot use the following functions: –...
Page 36: Checking Recordings - End Search/Edit Search/Rec Review
Checking recordings – End search/Edit search/Rec Review You can use these buttons to check the recorded picture or shoot so that the transition between the last recorded scene and the next scene you record is smooth. End search You can go to the end of the recorded section after you record. (1) Set the POWER switch to CAMERA.
Page 37: Edit Search
Checking recordings – End search/Edit search/Rec Review Edit search You can search for the next recording start point. You cannot monitor the sound. (1) Set the POWER switch to CAMERA. (2) Hold down the EDITSEARCH. The recorded portion is played back. Release EDITSEARCH to stop playback.
Page 38: Playback - Basics
Playing back tape You can monitor the recorded tape on the LCD screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can also control playback using the Remote Commander supplied with your camcorder. (1) Set the POWER switch to VCR while pressing the small green button.
Page 39: To Display The Screen Indicators - Display Function
Playing back tape To return to FN Press EXIT. To cancel playback Press To rewind the tape Press during playback stop. To fastforward the tape Press during playback stop. To view a still image (playback pause) Press during playback. To resume playback, press If you leave the power on for a long time Your camcorder gets warm.
Page 40: Using The Touch Panel
Playing back tape About date/time and various settings Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code). Follow the steps below to display the data code using the touch panel or the Remote Commander.
Page 41: Various Playback Modes
Playing back tape Various playback modes To operate video control buttons, set the POWER switch to VCR. Using the touch panel (1) Press FN and select PAGE3. (2) Press V SPD PLAY to display video control buttons. To change the playback direction Press during playback to reverse the playback direction.
Page 42 Playing back tape Video control buttons Marks on your camcorder are different from those on the Remote Commander supplied with your camcorder. On your camcorder: To play back or pause the tape To stop the tape To rewind the tape To fastforward the tape To play back the tape slowly To forward one frame at a time...
Page 43: Viewing A Recording On Tv
Viewing a recording on TV Connect your camcorder to a TV with the A/V connecting cable supplied with your camcorder to watch the playback pictures on the TV screen. You can operate the playback control buttons in the same way as when you view playback pictures on the LCD screen.
Page 44 Viewing a recording on TV If the device you want to connect to has an S video jack •Pictures can be reproduced more faithfully by using an S video cable (optional). With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable.
Page 45: Advanced Recording Operations
— Advanced Recording Operations — Recording still images on “Memory Stick” during tape recording standby or tape recording During tape recording standby The POWER switch should be set to (1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE indicator appears.
Page 46 Recording still images on “Memory Stick” during tape recording standby or tape recording Note You cannot record still images on the “Memory Stick” during following operations (The – End search – Wide mode – During fading in with BOUNCE – MEMORY MIX “Memory Stick”...
Page 47: Self-Timer Recording
Self-timer recording START/STOP Recording on the tape The POWER switch should be set to Operate by touching the panel. (1) During standby, press FN and select PAGE2. (2) Press SELFTIMER. (self-timer) indicator appears on the screen. (3) Press EXIT to return to FN. (4) Press START/STOP.
Page 48: Adjusting The White Balance Manually
Adjusting the white balance manually Normally white balance is automatically adjusted. The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select WHT BAL in (4) Select a desired mode, then press EXEC.
Page 49: Using The Wide Mode
Using the wide mode If you move the power zoom lever to “W” side, you can record with a wider angles than normal tape recording. You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9WIDE). Black bands appear on the screen during recording in the 16:9WIDE mode [a].
Page 50 Using the wide mode Notes •In the wide mode, you cannot operate the following functions: – Recording still images on the “Memory Stick” during tape recording or tape recording standby – BOUNCE – OLD MOVIE •Pictures recorded on the tape in wide mode cannot be returned to normal size. Connection for a TV Pictures recorded in the 16:9WIDE mode automatically appear on the TV screen at full size when:...
Page 51: Using The Fader Function
Using the fader function You can fade in or out to give your recording a professional appearance. STBY NORM. FADER (normal) MOSC. FADER (mosaic) BOUNCE 1) 2) OVERLAP WIPE MONOTONE When fading in, the picture gradually changes from black-and-white to color. When fading out, the picture gradually changes from color to black-and-white.
Page 52 Using the fader function The POWER switch should be set to Operate by touching the panel. (1) When fading in [a] Press FN to display PAGE1 during recording standby. When fading out [b] Press FN to display PAGE1 during recording. (2) Press FADER.
Page 53 Using the fader function Note You cannot use the following functions while using fader. Also, you cannot use fader while using following functions: – Super NightShot – Color Slow Shutter – Digital effect – Interval Recording – Frame recording When you select OVERLAP, WIPE or DOT Your camcorder automatically stores the image recorded on the tape.
Page 54: Using Special Effects - Picture Effect
Using special effects – Picture effect NEG. ART [a] : The color and brightness of the picture are reversed. SEPIA : B&W : SOLARIZE [b] : The picture looks like an illustration with a strong contrast. PASTEL [c] : MOSAIC [d] : The POWER switch should be set to Operate by touching the panel.
Page 55: Using Special Effects - Digital Effect
Using special effects – Digital effect STILL You can record a still image so that it is superimposed on a moving picture. FLASH (flash motion) You can record still images successively at regular intervals. LUMI. (luminance key) You can swap the brighter area in a still image with a moving picture. TRAIL You can record a picture so that an incidental image like a trail is left.
Page 56 Using special effects – Digital effect The POWER switch should be set to Operate by touching the panel. (1) Press FN and select PAGE2. (2) Press DIG EFFT. The screen to select a digital effect is displayed. (3) Press a desired mode. When you select STILL or LUMI., the still image is stored in memory.
Page 57 Using special effects – Digital effect Notes • While using digital effect, you cannot use the following functions: – Super NightShot – Color Slow Shutter – Fader • PROGRAM AE does not work in the SLOW SHTR mode. • The following functions do not work in the OLD MOVIE mode: –...
Page 58: Using Program Ae
Using PROGRAM AE SPOTLIGHT This mode prevents people’s faces, for example, from appearing excessively white when shooting subjects lit by strong light in the theater. PORTRAIT (soft portrait) This mode brings out the subject while creating a soft background for subjects such as people or flowers.
Page 59 Using PROGRAM AE The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select PROGRAM AE in (4) Select a desired mode, then press EXEC. To return to FN Press EXIT.
Page 60: Adjusting The Exposure Manually
Adjusting the exposure manually We recommend adjusting the exposure manually in the following cases: – When the subject is backlit – When the subject is too bright against the background – When recording dark pictures (e.g. night scenes) faithfully The POWER switch should be set to Operate by touching the panel.
Page 61: Using Spot Light-Metering Function - Flexible Spot Meter
Using spot light-metering function – Flexible Spot Meter You can take a picture with the appropriate exposure automatically for just the point you want to focus on and with its exposure fixed. Use Flexible Spot Meter in the following cases: –...
Page 62: Focusing Manually
Focusing manually You can gain better results by manually adjusting the focus in the following cases. Normally, focus is automatically adjusted. •The autofocus mode is not effective when shooting: – Subjects through glass coated with water droplets – Horizontal stripes –...
Page 63: Using Spot Focus Function - Spot Focus
Using spot focus function – Spot Focus You can take a picture with the appropriate focus automatically for just the point you want to focus on and with its focus fixed. The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1.
Page 64: Interval Recording
Interval Recording You can make a time-lapse recording by setting your camcorder to automatically record and standby sequentially. You can achieve an excellent recording for flowering, emergence, etc. with this function. There may be a discrepancy in recording time of up to +/– six frames from the selected time.
Page 65: Frame By Frame Recording - Frame Recording
Frame by frame recording – Frame recording You can make a recording with a stop-motion animated effect using frame recording. To create this effect, alternately move the subject a little and make frame recording. We recommend that you use a tripod, and operate your camcorder using the Remote Commander after step 6.
Page 66: Using The Viewfinder
Using the viewfinder Turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out. You can operate with the touch panel using the viewfinder. Use the viewfinder when operating camera brightness and fader on the touch panel. The POWER switch should be set to Operate by touching the panel.
Page 67 Using the viewfinder Note When the POWER switch is set to VCR or during memory playback, you cannot operate with the touch panel using the viewfinder. To operate the items that do not appear Set the LCD panel back to the previous position. Operate the items using the LCD screen.
Page 68: Advanced Playback Operations
Playing back tape with picture effect The POWER switch should be set to Operate by touching the panel. (1) During playback or playback pause, press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select P EFFECT in (4) Select a desired mode, then press EXEC.
Page 69: Playing Back Tape With Digital Effect
Playing back tape with digital effect The POWER switch should be set to Operate by touching the panel. (1) During playback or playback pause, press FN and select PAGE2. (2) Press DIG EFFT. The screen to select a digital effect is displayed. (3) Select a desired mode.
Page 70: Enlarging Images Recorded On Tape - Tape Pb Zoom
Enlarging images recorded on tape – Tape PB ZOOM Besides the operation described here, your camcorder can enlarge still images recorded on the “Memory Stick” (p. 129). The POWER switch should be set to Operate by touching the panel. (1) During playback or playback pause, press FN and select PAGE2. (2) Press PB ZOOM.
Page 71: Quickly Locating A Scene - Zero Set Memory
Quickly locating a scene – Zero set memory Your camcorder automatically searches for a desired scene having the tape counter value of “0:00:00.” Use the Remote Commander for this operation. The POWER switch should be set to (1) During playback, press ZERO SET MEMORY on the Remote Commander at the point you want to locate later.
Page 72: Searching The Boundaries Of Recorded Tape By Title - Title Search
Searching the boundaries of recorded tape by title – Title search Use the cassette with Cassette Memory for this operation. Use the Remote Commander for this operation. Before operation Set CM SEARCH in The POWER switch should be set to (1) Press SEARCH MODE on the Remote Commander repeatedly, until the TITLE SEARCH indicator appears.
Page 73: Searching A Recording By Date - Date Search
Searching a recording by date – Date search • DATE SEARCH by using Cassette Memory c Cue by selecting the recording date on the screen • DATE SEARCH without using Cassette Memory c Cue to changing point of recording date Use the Remote Commander for this operation.
Page 74: Searching For The Date Without Using Cassette Memory
Searching a recording by date – Date search Searching for the date without using Cassette Memory The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select CM SEARCH in (4) Select OFF, then press EXEC.
Page 75: Editing
— Editing — Dubbing tape You can dub or edit on the VCR connected to your camcorder using your camcorder as a player. You can connect either the A/V connecting cable (supplied) or i.LINK cable (optional). If you connect with the i.LINK cable (optional), video and audio signals are transmitted in digital form for high-quality editing.
Page 76: Dubbing A Tape
Dubbing tape Dubbing a tape Before operation for connecting with the A/V connecting cable •Set DISPLAY in •Press the following buttons to make the indicator disappear so that they will not be superimposed on the edited tape: On your camcorder: DISPLAY/BATTERY INFO, DATA CODE On the Remote Commander: DISPLAY, DATA CODE, SEARCH MODE...
Page 77: Dubbing Only Desired Scenes - Digital Program Editing (On Tape)
Dubbing only desired scenes – Digital program editing (on tape) You can duplicate selected scenes (programs) for editing onto the tape without operating the VCR. Scenes can be selected by frame. You can set up to 20 programs. Your camcorder can dub on the “Memory Stick.” See page 121 for details. Unwanted scene Before operating Digital program editing on the tape recorded...
Page 78 Dubbing only desired scenes – Digital program editing (on tape) Step 2: Setting the VCR to operate To connect using the A/V connecting cable, send the control signal by infrared rays to the remote sensor on the VCR. The POWER switch should be set to Operate by touching the panel.
Page 79 Dubbing only desired scenes – Digital program editing (on tape) (11) Select PAUSEMODE, then press EXEC. (12) Select the mode to cancel recording pause on the VCR, then press EXEC. The correct button depends on your VCR. Refer to the operating instructions of your VCR. V I DEO ED I T ED I T SET CONTROL...
Page 80 About the IR SETUP code The IR SETUP code is stored in the memory of your camcorder. Be sure to set the correct code, depending on your VCR. Default setting is code number 3. Brand Sony Admiral (M. Wards) Aiwa Akai Audio Dynamic Bell&Howell...
Page 81 Dubbing only desired scenes – Digital program editing (on tape) When the VCR does not operate correctly •After checking the code in “About the IR SETUP code” (p. 80), set the IR SETUP or the PAUSEMODE again. •Place your camcorder at least 30 cm (12 in.) away from the VCR. •Refer to the operating instructions of your VCR.
Page 82 Dubbing only desired scenes – Digital program editing (on tape) To return to FN Press END to return to PAGE1, then press EXIT. Notes •When you complete step 3, the image to adjust the synchronization is recorded for about 50 seconds. •If you start recording from the very beginning of the tape, the first few seconds of the tape may not be recorded properly.
Page 83 Dubbing only desired scenes – Digital program editing (on tape) Operation 1: Making a Program The POWER switch should be set to Operate by touching the panel. (1) Insert the cassette for playback into your camcorder, and insert the tape for recording into the VCR.
Page 84: Erasing The Program You Have Set
Dubbing only desired scenes – Digital program editing (on tape) Note You cannot operate recording during Digital program editing. On a blank portion of the tape You cannot set IN or OUT. If there is a blank portion between the IN point and the OUT point on the tape The total time may not be displayed correctly.
Page 85 Dubbing only desired scenes – Digital program editing (on tape) Operation 2: Performing Digital program editing (Dubbing the tape) (1) When you use a digital video camera recorder, set the power switch of VCR to VCR/VTR. (2) Make sure your camcorder and the VCR are connected, and that the VCR is set to recording pause.
Page 86: Recording Video Or Tv Programs
Recording video or TV programs You can record the tape from another VCR or a TV program from a TV that has video/ audio outputs. Use your camcorder as a recorder. You can connect either the A/V connecting cable (supplied) or i.LINK cable (optional). If you connect with the i.LINK cable (optional), video and audio signals are transmitted in digital form for high-quality editing.
Page 87 Recording video or TV programs Recording video or TV programs Before operation for connecting with the A/V connecting cable Set DISPLAY in to LCD in the menu settings when using the A/V connecting cable. (The default setting is LCD.) The POWER switch should be set to Operate by touching the panel.
Page 88: Inserting A Scene From A Vcr - Insert Editing
Inserting a scene from a VCR – Insert editing You can insert a new scene with sound from a VCR onto the originally recorded tape by specifying the insert start and end points. Use the Remote Commander for this operation. Connections are the same as on page 86.
Page 89: Inserting A Scene From A Vcr – Insert Editing
Inserting a scene from a VCR – Insert editing 0:00:00 ZERO SET ZERO SET MEMORY MEMORY To change the insert end point Press ZERO SET MEMORY on the Remote Commander again after step 4 to erase the ZERO SET MEMORY indicator and begin from step 2. To insert a scene without setting the insert end point Skip step 2 and 3.
Page 90: Audio Dubbing
Audio dubbing You can record additional audio to the original sound on the tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add sound to the tape already recorded in the 12-bit mode by specifying starting and ending points. The original sound will not be erased.
Page 91 Audio dubbing Connecting the microphone (optional) to the intelligent accessory shoe Microphone (optional) Connecting the A/V connecting cable to the AUDIO/VIDEO jack Audio equipment LINE OUT AUDIO L White Do not connect the video (yellow) plug. : Signal flow Note When dubbing with the AUDIO/VIDEO jack or the built-in microphone, pictures are not output through the S VIDEO jack or AUDIO/VIDEO jack.
Page 92 Audio dubbing Adding an audio sound on the recorded tape Choose a connection mentioned on page 90, and connect audio equipment or microphone to your camcorder. Then follow the procedure below. The POWER switch should be set to Operate by touching the panel. (1) Insert the recorded tape into your camcorder.
Page 93: Monitoring The New Recorded Sound
Audio dubbing Monitoring the new recorded sound The POWER switch should be set to Operate by touching the panel. (1) Play back the tape on which you added audio. (2) Press FN to display PAGE1. (3) Press MENU to display the menu. (4) Select AUDIO MIX in (5) Press r/R to adjust the balance between the original sound (ST1) and the new sound (ST2), then press EXEC.
Page 94: Superimposing A Title On A Cassette With Cassette Memory
Superimposing a title on a cassette with Cassette Memory One cassette can have up to about 20 titles, if one title consists of five characters. However, if the Cassette Memory is full with date and cassette label data, one cassette can have only up to about 11 titles with five characters each.
Page 95: Erasing A Title
Superimposing a title on a cassette with Cassette Memory To use the custom title If you want to use the custom title, select The titles superimposed with your camcorder •They appear only by DV •The point you superimposed the title may be detected as an index signal when searching a recording with other video equipment.
Page 96: Making Your Own Titles
Making your own titles You can make up to two titles and store them in the memory of your camcorder. Each title can have up to 20 characters. The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1.
Page 97: Labeling A Cassette On A Cassette With Cassette Memory
Labeling a cassette on a cassette with Cassette Memory The label can consist of up to 10 characters and are stored in Cassette Memory. When you insert the labeled cassette with the POWER switch set to CAMERA, or the POWER switch is set to VCR, the label is displayed for about five seconds.
Page 98: Erasing All The Data In Cassette Memory
Erasing all the data in Cassette Memory The following data saved in Cassette Memory can be completely erased once: – Date data – Title data – Cassette label The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1.
Page 99: Memory Stick" Operations
— “Memory Stick” Operations — Using “Memory Stick” – Introduction The “Memory Stick” is a new light and small recording media which, despite of the size, can store greater data than a floppy disk. The “Memory Stick” can, in addition to recording images and easily playing back images you want to see, follow operations such as: –...
Page 100 Using “Memory Stick” – Introduction Image data may be damaged in the following cases. Damaging image data is not guaranteed – If you eject the “Memory Stick” or turn off your camcorder while reading the image file from the “Memory Stick” or recording data onto the “Memory Stick” (while the access lamp is lit or flashing).
Page 101 Reinsert the “Memory Stick” a few times. The “Memory Stick” may be damaged if the indicator still appears. If this occurs, use another “Memory Stick.” and “MagicGate Memory Stick” are trademarks of Sony are trademarks of Sony Corporation. are trademarks of Sony Corporation.
Page 102: Selecting The Quality And Size Of Image Data
Selecting the quality and size of image data Selecting still image quality The default setting is FINE. The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select STILL SET in (4) Select QUALITY, then press EXEC.
Page 103 Selecting the quality and size of image data Selecting the still image size You can select image size 1152 CAMERA or VCR, the image size is automatically set to 640 480.). The default setting is 1152 864. The POWER switch should be set to Operate by touching the panel.
Page 104: Selecting The Moving Picture Size
Selecting the quality and size of image data Selecting the moving picture size You can select picture size 320 240 or 160 The default setting is 320 240. The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1.
Page 105 Selecting the quality and size of image data Approximate number of still images and time of moving pictures that can be recorded on one “Memory Stick” The number of still images and the time of moving pictures you can record vary depending on which image quality mode you select and the complexity of the subject.
Page 106: Recording Still Images On "Memory Stick" - Memory Photo Recording
Recording still images on “Memory Stick” – Memory Photo recording The POWER switch should be set to (1) Keep pressing PHOTO lightly and check the image. The green z indicator stops flashing, then lights up. The brightness of the image and the focus are adjusted and fixed while your camcorder targets at the middle of the image.
Page 107 Recording still images on “Memory Stick” – Memory Photo recording You can record still images on the “Memory Stick” during tape recording or tape recording standby See page 45 for details. When the POWER switch is set to MEMORY The following functions do not work: –...
Page 108: Recording Images Continuously
Recording still images on “Memory Stick” – Memory Photo recording Recording images continuously You can record still images continuously. Before recording, select a desired mode described below in the menu settings. NORMAL [a] ( Your camcorder shoots up to four still images in 1152 864 size or 13 still images in 480 size at about 0.5 sec intervals.
Page 109 Recording still images on “Memory Stick” – Memory Photo recording The number of still images in continuous shooting The number of still images you can shoot continuously varies depending on the image size and the capacity of the “Memory Stick.” During continuous recording of images The flash (optional) does not work.
Page 110: Recording An Image From Tape As A Still Image
Recording an image from tape as a still image Your camcorder can read moving picture data recorded on a tape and record it as a still image on the “Memory Stick.” Image size is automatically set to 640 480. Before operation Insert the “Memory Stick”...
Page 111: Recording A Still Image From Other Equipment
Recording an image from tape as a still image Recording a still image from other equipment You can use either A/V connecting cable or i.LINK cable. Connect the devices as illustrated on page 86. When connecting with the A/V connecting cable, set DISPLAY in menu settings.
Page 112: Superimposing A Still Image In "Memory Stick" On An Image - Memory Mix
Superimposing a still image in “Memory Stick” on an image – MEMORY MIX You can superimpose a still image you have recorded on the “Memory Stick” on top of the moving picture you are recording. (However you cannot superimpose a still image onto the moving picture you have finished recording.) You can record the superimposed images on the tape or the “Memory Stick.”...
Page 113 Superimposing a still image in “Memory Stick” on an image – MEMORY MIX The “Memory Stick” supplied with your camcorder stores 20 images: – For M. CHROM: 18 images (such as a frame) 101-0001 to 101-0018 – For C. CHROM: two images (such as a background) 101-0019 to 101-0020 Sample images Sample images stored in the “Memory Stick”...
Page 114 Superimposing a still image in “Memory Stick” on an image – MEMORY MIX M I X To change the still image to be superimposed Press –/+ in the lower right corner before step 5. To cancel MEMORY MIX Press OFF to return to PAGE2. Note During recording you cannot reselect the mode.
Page 115: Interval Photo Recording
Interval Photo Recording You can carry out a time-lapse recording by setting the camcorder to automatically record still images. Example [a] Memory Photo recording [b] INTERVAL 10 min The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1.
Page 116: Recording Moving Pictures On "Memory Stick" - Mpeg Movie Recording
Recording moving pictures on “Memory Stick” – MPEG MOVIE recording The picture and sound are recorded up to the full capacity of the “Memory Stick” (MPEG MOVIE EX). The POWER switch should be set to Press START/STOP. Your camcorder starts recording. The camera recording lamp located on the front of your camcorder lights up.
Page 117 Recording moving pictures on “Memory Stick” – MPEG MOVIE recording Note Sound is recorded in monaural. When the POWER switch is set to MEMORY The following functions do not work: – Digital zoom – Super NightShot – Color Slow Shutter –...
Page 118: Self-Timer Recording
Self-timer recording You can record still images and moving pictures on the “Memory Stick” with the self- timer. You can also use the Remote Commander for this operation. START/STOP Recording a still image The POWER switch should be set to Operate by touching the panel.
Page 119: Recording A Picture From Tape As A Moving Picture
Recording a picture from tape as a moving picture Your camcorder can read moving picture data recorded on a tape and record it as a moving picture on the “Memory Stick.” Before operation Insert the recorded tape into your camcorder. The POWER switch should be set to Operate by touching the panel.
Page 120: Recording A Moving Picture From Other Equipment
Recording a picture from tape as a moving picture Recording a moving picture from other equipment You can use either A/V connecting cable or i.LINK cable. Connect the devices as illustrated on page 86. When connecting with the A/V connecting cable, set DISPLAY in menu settings.
Page 121: Recording Edited Pictures From Tape As A Moving Picture - Digital Program Editing (On "Memory Stick")
Recording edited pictures from tape as a moving picture – Digital program editing (on “Memory Stick”) You can duplicate selected scenes (programs) for editing onto the “Memory Stick.” Making the program The POWER switch should be set to Operate by touching the panel. (1) Insert the tape for playback, and the “Memory Stick”...
Page 122 Recording edited pictures from tape as a moving picture – Digital program editing (on “Memory Stick”) Performing the program (Dubbing the “Memory Stick”) The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu.
Page 123: Changing The Recording Folder
Changing the recording folder You can create folders up to “999MSDCF” in the “Memory Stick.” The default setting is “101MSDCF” folder to record. Creating a new folder The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu.
Page 124: Viewing A Still Image - Memory Photo Playback
Viewing a still image – Memory Photo playback You can play back still images recorded on the “Memory Stick.” You can also play back six images including moving pictures at a time arranged in the same order of recording on the “Memory Stick” by selecting the index screen. The POWER switch should be set to Operate by touching the panel.
Page 125 Viewing a still image – Memory Photo playback Playing back six recorded images at a time (index screen) This function is especially useful when searching for a particular image. Press INDEX to display the index screen. A red B mark appears above the image that appears before changing to the index screen mode.
Page 126: Viewing A Moving Picture - Mpeg Movie Playback
Viewing a moving picture – MPEG MOVIE playback You can play back moving pictures recorded on the “Memory Stick.” You can also play back six images including still images in order of recording on the “Memory Stick” at a time by selecting the index screen. The POWER switch should be set to Operate by touching the panel.
Page 127 Viewing a moving picture – MPEG MOVIE playback Playback picture from desired part The moving picture recorded on the “Memory Stick” is divided into parts. It is divided into a maximum of 60. You can select every each one point and playback pictures. The POWER switch should be set to Operate by touching the panel.
Page 128: Choosing Playback Folder
Choosing playback folder You can change the folder currently chosen for playback. The currently chosen folder is displayed in the upper right on the screen. The POWER switch should be set to Operate by touching the panel. (1) Press FN to display to PAGE1. (2) Press PB FOLDR.
Page 129: Enlarging Still Images Recorded On "Memory Stick" - Memory Pb Zoom
Enlarging still images recorded on “Memory Stick” – Memory PB ZOOM You can enlarge still images recorded on the “Memory Stick.” The POWER switch should be set to Operate by touching the panel. (1) Play back the image to enlarge in the frame. (2) Press FN and select PAGE2.
Page 130: Playing Back Images Continuously - Slide Show
Playing back images continuously – Slide show You can play back all the images in the “Memory Stick” or in the specified folder using slide show. The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu.
Page 131: Preventing Accidental Erasure - Image Protection
Preventing accidental erasure – Image protection To prevent accidental erasure of important images, you can protect selected images. The POWER switch should be set to Operate by touching the panel. (1) Press INDEX to display the index screen. (2) Press - MARK. The screen to protect the image appears. (3) Press the image you want to protect.
Page 132: Deleting Images - Delete
Deleting images – DELETE You can delete all images or selected images. Deleting selected images The POWER switch should be set to Operate by touching the panel. (1) Play back the image you want to delete. (2) Press FN to display PAGE1. (3) Press DEL.
Page 133: Deleting Selected Images On The Index Screen
Deleting images – DELETE Deleting selected images on the index screen The POWER switch should be set to Operate by touching the panel. (1) Press INDEX to display the index screen. (2) Press DEL. Then press the image you want to delete. The number of the selected image is highlighted.
Page 134: Deleting All The Images
Deleting images – DELETE Deleting all the images You can delete all the unprotected images in the “Memory Stick.” The POWER switch should be set to Operate by touching the panel. (1) Press FN to display PAGE1. (2) Press MENU to display the menu. (3) Select DELETE ALL in (4) Select ALL FILES or FOLDER sss*, then press EXEC.
Page 135: Changing Image Size - Resize
Changing image size – Resize You can change the image size of recorded still images to 640 480 or 320 240. Reducing the image size is convenient for use in attachments to e-mail. The original image is retained even after resizing. The POWER switch should be set to Operate by touching the panel.
Page 136: Writing A Print Mark - Print Mark
Writing a print mark – Print mark This function is useful for printing out still images later. (You cannot specify the number for printouts.) Your camcorder conforms with the DPOF (Digital Print Order Format) standard for specifying the still images to print out. The POWER switch should be set to Operate by touching the panel.
Page 137: Viewing Images With A Computer - Introduction
— Viewing images with a computer — Viewing images with a computer – Introduction There are following ways of connecting your camcorder to a computer in order to view images saved on the “Memory Stick” or recorded on the tape on a computer. To view images on a computer which has a Memory Stick slot, first eject the “Memory Stick”...
Page 138 Viewing images with a computer – Introduction When connecting to a computer with the DV port The computer must have a DV port and editing software installed that can read video signals. DV Interface i.LINK i.LINK cable (optional) : Signal flow Viewing images recorded on the “Memory Stick”...
Page 139 Viewing images with a computer – Introduction Notes on using a computer “Memory Stick” •“Memory Stick” operations on your camcorder cannot be assured if the “Memory Stick” formatted on a computer is used on your camcorder, or if the “Memory Stick” in your camcorder was formatted from the computer when the USB cable was connected.
Page 140: Connecting Your Camcorder To A Computer Using The Usb Cable (For Windows Users)
Connecting your camcorder to a computer using the USB cable (For Windows users) Complete installation of the USB driver before connecting your camcorder to a computer. If you connect your camcorder to a computer first, you will not be able to install the USB driver correctly. When connecting to a computer with the USB port You must install a USB driver onto the computer in order to connect your camcorder to the computer’s USB port.
Page 141 Connecting your camcorder to a computer using the USB cable (For Windows users) Recommended computer usage environment when connecting with USB cable and viewing the “Memory Stick” images on a computer Recommended Windows environment Microsoft Windows 98, Windows 98SE, Windows Me, Windows 2000 Professional, Windows XP Home Edition or Windows XP Professional Standard installation is required.
Page 142: Installing The Usb Driver
Connecting your camcorder to a computer using the USB cable (For Windows users) Installing the USB driver Start the following operation without connecting the USB cable to the computer. Connect the USB cable according to “Making the computer recognize your camcorder.” If you are using Windows 2000, log in with permission of administrators.
Page 143: Installing Image Transfer
Connecting your camcorder to a computer using the USB cable (For Windows users) Installing Image Transfer Make sure USB driver installation is complete. This function enables image data recorded on the “Memory Stick” to be automatically transferred (copied) to a computer. If you are using Windows 2000, log in with permission of administrators.
Page 144: Installing Imagemixer
Installing ImageMixer Make sure USB driver installation is complete. “ImageMixer Ver.1.5 for Sony” is an application that can capture or edit images, or create video CDs. To install and use this software in Windows 2000, you must be authorized as administrators.
Page 145 Connecting your camcorder to a computer using the USB cable (For Windows users) MEMORY MIX album Once “ImageMixer” is installed, the MEMORY MIX album is created in “Album” of “ImageMixer” and sample images are stored in there. Those sample images can be transferred from the MEMORY MIX album to a “Memory Stick”...
Page 146 Connecting your camcorder to a computer using the USB cable (For Windows users) Viewing images recorded on the “Memory Stick” (1) Insert the “Memory Stick” into your camcorder. (2) Connect the AC Adaptor, then set the POWER switch to MEMORY. (3) Connect the using the supplied USB cable.
Page 147 Connecting your camcorder to a computer using the USB cable (For Windows users) If you cannot install the USB driver The USB driver has been registered incorrectly as a computer was connected to your camcorder before installation of the USB driver was complete. Follow the procedure below to correctly install the USB driver.
Page 148 Connecting your camcorder to a computer using the USB cable (For Windows users) Windows 2000 6 Set the POWER switch to OFF (CHG) on your camcorder, then disconnect the USB cable. 7 Restart the computer. Step 2: Install the USB driver on the supplied CD-ROM Follow the entire procedure in “Installing the USB driver”...
Page 149 Select “My Computer” t “Control Panel” t “System,” and click “Device Manager.” 6 Select “Other devices.” Select the device prefixed with the “?” mark and delete. Ex: (?)Sony Handycam 7 Set the POWER switch to OFF (CHG) on your camcorder, then disconnect the USB cable. 8 Restart the computer.
Page 150: Viewing Pictures Recorded On Tape On A Computer - Usb Streaming (For Windows Users)
(6) Select USB STREAM in (7) Select ON, then press EXEC. (8) Select “Start” t “Programs” t “PIXELA” t “ImageMixer” t “ImageMixer Ver.1.5 for Sony.” The “ImageMixer Ver.1.5 for Sony” startup screen appears on the computer. The title screen appears. (9) Click (10) Click , then press EXEC (p.
Page 151 Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) (11) Connect the (USB) jack on your camcorder to the USB port on the computer using the supplied USB cable. (12) Click to start playback. You can control video operations with the buttons on the screen. The picture from the tape appears on the monitor window on the computer.
Page 152 Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Capturing still images (1) Click (2) Looking at the monitor window, move the cursor to point you want to capture. The still image on the screen is captured. Captured images appear in the thumbnail list window.
Page 153 Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) To close “ImageMixer” Click in the upper right corner of the screen. Notes •When you view images on a computer with the USB connection, the following may occur.
Page 154 Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Making Video CDs – Easy Video CD This function makes it simple to create a video CD by capturing images recorded on a tape or images live from your camcorder. Capturing images recorded on a tape onto a CD-R (1) Follow the step 1 to 8 on page 150.
Page 155 Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Capturing images live from your camcorder onto a CD-R Eject the cassette before operation. Your camcorder automatically turns off after about five minutes if the cassette is inserted. (1) Follow the step 1 and 2 on page 150.
Page 156 Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Seeing the on-line help (operating instructions) of ImageMixer A “ImageMixer Ver.1.5 for Sony” on-line help site is available where you can find the detailed operating method of “ImageMixer Ver.1.5 for Sony.” (1) Click The ImageMixer’s Manual screen appears.
Page 157: Viewing Images Recorded On "Memory Stick" On A Computer (For Windows Users)
Viewing images recorded on “Memory Stick” on a computer (For Windows users) The image data recorded on the “Memory Stick” is automatically transferred (copied) to a computer with Image Transfer. You can view images with ImageMixer. You need to install the USB diver, Image Transfer and ImageMixer to view the “Memory Stick”...
Page 158 Viewing images recorded on “Memory Stick” on a computer (For Windows users) Viewing images without Image Transfer Before operation •You need to install the USB driver to view the “Memory Stick” images on a computer (p. 142). •An application such as Windows Media Player must be installed to play back moving pictures in Windows environment.
Page 159 Viewing images recorded on “Memory Stick” on a computer (For Windows users) Image file storage destinations and image files Image data recorded with your camcorder is stored in a folder in the “Memory Stick.” The meanings of the file names are as follows. ssss stands for any number within the range from 0001 to 9999.
Page 160: Connecting Your Camcorder To A Computer Using The Usb Cable (For Macintosh Users)
Connecting your camcorder to a computer using the USB cable (For Macintosh users) When connecting to a computer with the USB cable You must install a USB driver onto a computer in order to connect your camcorder to the computer’s USB port. The USB driver can be found on the CD-ROM supplied, along with the application software required for viewing images.
Page 161 (4) Click the “USB Driver” to open the folder containing the six files related to “Driver.” (5) Select the following two files, and drag and drop them into the System Folder. •Sony Camcorder USB Driver •Sony Camcorder USB Shim (6) When the message appears, click “OK.”...
Page 162: Viewing Images Recorded On "Memory Stick" On A Computer (For Macintosh Users)
Viewing images recorded on “Memory Stick” on a computer (For Macintosh users) Viewing images Before operation •You need to install the USB driver to view the “Memory Stick” images on a computer (p. 161). •QuickTime 3.0 or later must be installed to play back moving pictures. (1) Turn on the computer and allow Mac OS to load.
Page 163: Capturing Images From An Analog Video Unit On A Computer - Signal Convert Function
Capturing images from an analog video unit on a computer – Signal convert function You can capture images and sound from an analog video unit connected to a computer which has the DV port to your camcorder. Before operation Set DISPLAY in to LCD in the menu settings.
Page 164 Capturing images from an analog video unit on a computer – Signal convert function Notes •You need the software and computer that support the exchange of digital video signals. •Depending on the condition of the analog video signals, the computer may not be able to output the images correctly when you convert video signals into digital video signals via your camcorder.
Page 165: Using The Network Function
— Using the Network function — Accessing the network – DCR-TRV39 only You can access the Internet using a dedicated accessory that serves as a USB Network Adaptor. Once the access is made, you can view a Web page, send/receive your e-mail, etc. This section describes only how to open the network menu.
Page 166 Accessing the network How to hold your camcorder when operating network functions Hold your camcorder with your hand through the grip belt to keep from dropping it. The operation buttons needed for network functions appear on the LCD screen. Press the buttons with the stylus supplied.
Page 167: Customizing Your Camcorder
— Customizing Your Camcorder — Changing the menu settings To change the mode settings in the menu settings, select the menu items with r/R . The default settings can be partially changed. First, select the icon, then the menu item and the mode.
Page 168 Changing the menu settings Menu items are displayed as the following icons: MANUAL SET CAMERA SET VCR SET LCD/VF SET MEM SET 1 MEM SET 2 CM SET TAPE SET SETUP MENU OTHERS Selecting the mode setting of each item Menu items differ depending on the position of the POWER switch.
Page 169 Changing the menu settings Icon/item Mode CAMERA SET D ZOOM z OFF 16:9WIDE z OFF STEADYSHOT z ON N.S. LIGHT z ON Notes on SteadyShot • SteadyShot will not correct excessive camera-shake. • Attachment of a conversion lens (optional) may influence SteadyShot. If you cancel SteadyShot (SteadyShot off) indicator appears.
Page 170 Changing the menu settings Icon/item Mode VCR SET HiFi SOUND z STEREO AUDIO MIX A/V t DV OUT z OFF LCD/VF SET LCD B.L. z BRT NORMAL LCD COLOR VF B.L. z BRT NORMAL Notes on LCD B.L. and VF B.L. •When you select BRIGHT, battery life is reduced by about 10 percent during recording.
Page 171 Changing the menu settings Icon/item Mode MEM SET 1 STILL SET BURST z OFF NORMAL EXP BRKTG QUALITY z FINE STANDARD IMAGESIZE z 1152 864 MOVIE SET IMAGESIZE z 320 REMAIN z AUTO NEW FOLDER z ADD RETURN REC FOLDER ——...
Page 172 Changing the menu settings Icon/item Mode MEM SET 2 SLIDE SHOW z ALL FILES INT. R -STL z OFF DELETE ALL z RETURN FORMAT z RETURN * The folder name is displayed in the sss. Notes on formatting •Do not do any of the following while the FORMATTING indicator appears: –...
Page 173 Changing the menu settings Icon/item Mode CM SET TITLE —— TITLEERASE —— TITLE DSPL z ON CM SEARCH z ON TAPE TITLE —— ERASE ALL z RETURN Meaning To superimpose a title or make your own title (p. 94, 96) To erase the title you have superimposed (p.
Page 174 When you play back the tape on other camcorders or VCRs, noise may occur in pictures or sound. •When you record in the LP mode, we recommend using a Sony Excellence/Master mini DV cassette so that you can get the most out of your camcorder.
Page 175 Changing the menu settings Icon/item Mode SETUP MENU CLOCK SET —— USB STREAM z OFF LANGUAGE z ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS DEMO MODE z ON Notes on DEMO MODE • You cannot select DEMO MODE when the cassette or the “Memory Stick” is inserted in your camcorder.
Page 176 Changing the menu settings Icon/item Mode OTHERS DATA CODE z DATE/CAM (On the Remote Commander) AREA SET DST SET* z OFF BEEP z MELODY COMMANDER z ON DISPLAY z LCD * Instead of DST, SUMMERTIME appears on the screen for some models. Note If you press DISPLAY/BATTERY INFO with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV or VCR will not appear on the LCD screen even when...
Page 177 Changing the menu settings Icon/item Mode OTHERS REC LAMP z ON VIDEO EDIT z RETURN TAPE MEMORY When recording a close subject When REC LAMP is set to ON, the red camera recording lamp on the front of your camcorder may reflect on the subject if it is close. In this case, we recommend you set REC LAMP to OFF.
Page 178: Troubleshooting
If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. If “C:ss:ss” appears on the screen, the self-diagnosis display function has activated. See page 186.
Page 179 Types of trouble and how to correct trouble Symptom An unknown picture appears on the screen. The picture is recorded in incorrect or unnatural colors. Picture appears too bright, and the subject does not appear on the screen. The click of the shutter does not sound.
Page 180: During Playback
Types of trouble and how to correct trouble During playback Symptom Playback is not possible. There are horizontal lines on the picture or the playback picture is not clear or does not appear. No sound or only a low sound is heard when playing back the tape.
Page 181 Types of trouble and how to correct trouble During recording and playback Symptom The power does not turn on. End search does not work. End search does not work correctly. The battery pack is quickly discharged. The remaining battery time indicator does not indicate the correct time.
Page 182 Types of trouble and how to correct trouble When operating using the “Memory Stick” Symptom The “Memory Stick” does not function. Recording does not function. The image cannot be deleted. You cannot format the “Memory Stick.” Deleting all the images cannot be carried out.
Page 183 Types of trouble and how to correct trouble Symptom You cannot play back images in actual size. You cannot play back image data. Cause and/or Corrective Actions • You may not be able to play back images in actual size when you try to play back images recorded by other equipment.
Page 184 VCR and your camcorder (p. 78). • Your camcorder is connected to DV equipment of other than Sony using the i.LINK cable. c Set it to IR (p. 78). • Setting program on a blank portion of the tape is attempted.
Page 185 • The battery pack is not properly installed. c Install it properly (p. 15). • Something is wrong with the battery pack. c Please contact your Sony dealer or local authorized Sony service facility. • DISPLAY/BATTERY INFO is pressed. c Press the LCD screen lightly.
Page 186: Self-Diagnosis Display
E:20:ss E:61:ss E:62:ss If you are unable to rectify the problem even if you try corrective actions a few times, contact your Sony dealer or local authorized Sony service facility. LCD screen, Viewfinder or display window Self-diagnosis display • C:ss:ss You can service your camcorder yourself.
Page 187: Warning Indicators
Warning indicators If indicators appear on the screen, check the following: See the page in parentheses “( )” for details. 101-0001 Warning indicator as to file Slow flashing: • The file is corrupted. • The file is unreadable. • You are trying to carry out MEMORY MIX on moving pictures (p.
Page 188: Warning Messages
Warning messages If messages appear on the screen, check the following. See the page in parentheses “( )” for details. • CLOCK SET • FOR ”InfoLITHIUM” BATTERY ONLY • CLEANING CASSETTE • COPY INHIBIT • FULL • 16BIT • REC MODE •...
Page 189: Additional Information
— Additional Information — Usable cassettes Selecting cassette types You can use the mini DV , Digital8 , VHS ED Betamax , DV * There are two types of mini DV cassettes: with Cassette Memory and without Cassette Memory. Cassettes with Cassette Memory have We recommend that you use cassettes with Cassette Memory.
Page 190: Audio Mode
Usable cassettes Audio mode 12-bit mode: The original sound can be recorded in stereo 1, and the new sound in 16-bit mode: A new sound cannot be recorded but the original sound can be recorded in When you play back the dual sound track tape When you play back the dual sound track tape recorded in a stereo system, set HiFi SOUND in Sound from speaker...
Page 191 Usable cassettes When the Cassette Memory function does not work Reinsert a cassette. The gold-plated connector of mini DV cassettes may be dirty or dusty. Cleaning gold-plated connector If the gold-plated connector on the cassette is dirty or dusty, the remaining tape indicator sometimes does not appear correctly, and you may not be able to operate functions using Cassette Memory.
Page 192: About The "Infolithium" Battery Pack
About the “InfoLITHIUM” battery pack This unit is compatible with the “InfoLITHIUM” battery pack (M series). Your camcorder operates only with the “InfoLITHIUM” battery pack. “InfoLITHIUM” M series battery packs have the What is the “InfoLITHIUM” battery pack? The “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camcorder and an optional AC adaptor/charger.
Page 193: Battery Life
Please buy a new battery pack. •The battery life varies depending on how it is stored and operating conditions and environment for each battery pack. “InfoLITHIUM” is a trademark of Sony Corporation.
Page 194: About I.link
DV Interfaces, refer to the operating instructions of the equipment to be connected. About the name “i.LINK” i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by Sony, and is a trademark approved by many corporations.
Page 195 DV Interface, see page 75 and 86. This unit can also be connected to other i.LINK (DV Interface) compatible equipment made by Sony (e.g. VAIO series personal computer) other than video equipment. Before connecting this unit to a computer, make sure that application software supported by this unit is already installed on a computer.
Page 196: Using Your Camcorder Abroad
Using your camcorder abroad Using your camcorder abroad You can use your camcorder in any country or area with the AC Adaptor supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b].
Page 197: Maintenance Information And Precautions
Maintenance information and precautions Moisture condensation If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or your camcorder may not operate correctly.
Page 198 The video head suffers from wear after long use. If you cannot obtain a clear image even after using a cleaning cassette, it might be because the video head is worn. Please contact your Sony dealer or local authorized Sony service facility to have the video head replaced.
Page 199: Adjusting The Lcd Screen (Calibration)
Maintenance information and precautions Charging the built-in rechargeable battery Your camcorder has a built-in rechargeable battery so that the date, time and other settings are retained even when the POWER switch is set to OFF (CHG). The built-in rechargeable battery is always charged as long as you are using your camcorder. The battery, however, will get discharged gradually if you do not use your camcorder.
Page 200 •If any solid object or liquid get inside the casing, unplug your camcorder and have it checked by a Sony dealer before operating it any further. •Avoid rough handling or mechanical shock. Be particularly careful of the lens. •Keep the POWER switch setting to OFF (CHG) when you are not using your camcorder.
Page 201: About Care And Storage Of The Lens
Maintenance information and precautions AC Adaptor • Unplug the unit from a wall outlet when you are not using the unit for a long time. To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. •...
Page 202 •If you touch the liquid, wash it off with water. •If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer.
Page 203: Specifications
Specifications Video camera recorder System Video recording system 2 rotary heads Helical scanning system Audio recording system Rotary heads, PCM system Quantization: 12 bits (Fs 32 kHz, stereo 1, stereo 2), 16 bits (Fs 48 kHz, stereo) Video signal NTSC color, EIA standards Usable cassette Mini DV cassette with the mark printed...
Page 204 Specifications Rechargeable battery pack NP-FM30 Maximum output voltage DC 8.4 V Output voltage DC 7.2 V Capacity 5.0 Wh (700 mAh) Dimensions (approx.) 38.2 20.5 55.6 mm (1 9/16 13/16 2 1/4 in.) (w/h/d) Mass (approx.) 65 g (2.3 oz) Type Lithium ion “Memory Stick”...
Page 205: Quick Reference
— Quick Reference — Identifying parts and controls Camcorder 1 LCD/Touch panel screen (p. 24, 29, 30) 2 Speaker 3 OPEN button (p. 26) 4 RESET button If you press RESET, all the settings (DCR-TRV39: except the network settings) including the date and time return to the default.
Page 206 Identifying parts and controls qa Hooks for shoulder strap qs Battery pack (p. 15) qd FOCUS button (p. 62) qf BACK LIGHT button (p. 33) qg Cassette compartment qh Cassette lid (p. 8) OPEN/EJECT lever (p. 8) qk Lens cap (p. 26) ql Tripod receptacle Make sure that the length of the tripod screw is less than 5.5 mm (7/32 inch).
Page 207 Your camcorder is equipped with a Carl Zeiss lens which can reproduce fine images. The lens for your camcorder was developed jointly by Carl Zeiss, in Germany, and Sony Corporation. It adopts the MTF* measurement system for video camera and offers a quality as the Carl Zeiss lens.
Page 208 Identifying parts and controls wk PHOTO button (p. 45, 106, 110) wl Power zoom lever (p. 32, 70, 129) e; Stylus holder (DCR-TRV39 only) (p. 166) ea Stylus (DCR-TRV39 only) (p. 166) Notes on the intelligent accessory shoe •The intelligent accessory shoe supplies power to optional accessories such as a video light or microphone.
Page 209 Identifying parts and controls (USB) jack (p. 137) ej S VIDEO jack (p. 43) ek LOCK switch (p. 27) el POWER switch (p. 26) r; DC IN jack (p. 16) DV Interface (p. 75, 86, 163) The DV Interface is i.LINK compatible. (LANC) jack (blue) rd AUDIO/VIDEO jack (p.
Page 210: Remote Commander
Sony VCRs to avoid erroneous remote control operation. If you use another Sony VCR in the Commander mode VTR 2, we recommend changing the Commander mode or covering the sensor of the VCR with black paper.
Page 211: Program Ae (P
Identifying parts and controls Operation indicators LCD screen and Viewfinder 50min STBY – STILL 16 : 9WIDE NEG. ART AUTO 60 AWB F1.8 1 Cassette Memory (p. 12, 189) 2 Remaining battery time (p. 28) 3 Zoom (p. 32)/Exposure (p. 60)/ Data file name (p.
Page 212: Index
Index A, B AC Adaptor ... 16 Adjusting the viewfinder ... 31 Audio dubbing ... 90 AUDIO MIX ... 170 AUDIO MODE ... 174 AUTO SHTR ... 168 A/V connecting cable ... 43, 75, 86, 163 BACK LIGHT ... 33 Battery Info ...

This manual is also suitable for:

Handycam dcr-trv39

Sony DCR-TRV38 PIXELA ImageMixer v1.5 Operating Instructions Manual

Main Features

Quick Start Guide

Getting Started

Recording - Basics

Playback - Basics

Advanced Recording Operations

Advanced Playback Operations

Editing

?Memory Stick” Operations

Using the Network Function

DCR-TRV39 Only

Customizing Your Camcorder

Troubleshooting

Additional Information

Quick Reference

Quick Links

Operating Instructions

Related Manuals for Sony DCR-TRV38 PIXELA ImageMixer v1.5

Summary of Contents for Sony DCR-TRV38 PIXELA ImageMixer v1.5

This manual is also suitable for:

Table of Contents