Getting Started; Step 1: Charging The Battery Pack - Sony DCR-SR220 Handycam&reg Operating Manual

Getting Started

Step 1: Charging the battery pack

Battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) after attaching
it to your camcorder.

Notes
Your camcorder operates only with an

"InfoLITHIUM" battery pack (H series).
1
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the  mark on the DC plug
is facing up.
2
Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
3
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
4
Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
US

DC IN jack
DC plug
/CHG lamp
POWER switch
AC Adaptor
Power cord
(Mains lead)
5
Set the camcorder onto the
Handycam Station securely.
The /CHG (charge) lamp lights up and
charging starts. The /CHG (charge)
lamp turns off when the battery pack is
fully charged. Remove the camcorder
from the Handycam Station.
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
BATT (battery)
release lever
To the wall outlet
(wall socket)