Step 2: Charging The Battery Pack - Sony Handycam DCR-HC1000 Operation Manual

Step 2: Charging the
battery pack
You can charge the battery by attaching the
"InfoLITHIUM" battery pack (F series) to
your camcorder.
b Note
• Only the "InfoLITHIUM" battery pack (NP-FF70/
FF71) can be used (p. 123).
• Do not short-circuit the DC plug of the AC Adaptor
or battery terminals with any metallic objects. This
may cause a malfunction.
• Use a nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
outlet immediately if any malfunction occurs.
DC IN jack
DC plug
Power cord
To the wall outlet
1
Push the catch on the battery
compartment lid in the direction of the
arrow 1 to open the lid.
AC Adaptor
2
Insert the battery pack in the direction
of the arrow until it clicks.
3
Close the battery compartment lid.
4
With the v mark on the DC plug facing
the battery compartment lid side,
connect the AC Adaptor to the DC IN
jack on your camcorder.
v mark
5
Connect the power cord to the AC
Adaptor.
6
Connect the power cord to the wall
outlet.
,continued
13
Getting started