Removing/Installing The Cover - Hitachi Compute Rack 220H Replacement Manual

Removing/Installing the cover

This section describes the procedure for removing and installing the cover of the
system.
Do not open the cover unless non hot-swappable components need
replacement.
Removing the front top cover
1. Slide out the system from the rack cabinet.
See Sliding out the system unit from a rack cabinet
2. Press the two release latches and slide the front top cover toward the front of
the system.
3. Lift up and remove the top cover from the system.
Figure 3-5: Remove the front top cover
Release latch
Preparation
Hitachi Compute Rack 220H CRU Replacement Guide
on page 3-5.
2
2
2
Release latch
3
3-7