Location And Connections; Connection Example; Before Connecting - Yamaha MMP1 Getting Started

3. Location and Connections

3. Location and
Connections

3-1. Connection example

Mic mute switch
MMP1
Network switch
DAW
Computer

3-2. Before connecting

Make various settings of the unit in advance.
3-2-1. UNIT ID
3-2-2. How to connect to the Dante network
3-2-3. IP address
Any settings you change while the power is on will be
retained and applied the next time you turn the power
on.
3-2-1. UNIT ID
Determines the ID for identifying each device on the
Dante network. For this setting, use the rotary switch on
the rear panel of the unit. The UNIT ID must be a unique
number in the network.
12 MMP1 Getting Started
3-2-2. How to connect to the Dante
The unit can be connected to the Dante network in one of
two ways: Star (Redundant) and Daisy Chain. For this
setting, use the DIP switch 1 on the rear panel of the unit.
REDUNDANT
Talkback
DAISY CHAIN
3-2-3. IP address
Determines the IP address for identifying this unit from a
computer. For this setting, use the DIP switch 7 and 8 on
the rear panel of the unit.
Auto IP
Preamp
DHCP
Audio signals
Control signals
Static IP (Auto)
Static IP (Manual)
network
down
DIP switch 1 (default).
up
DIP switch 1 .
up
DIP switch 7 and 8
An IP address is automatically set in the
range of from 169.254.0.1 to
169.254.254.254 (default).
down
DIP switch 7 and 8
An IP address is assigned by the DHCP
server.
up
DIP switch 7 and 8
The IP address is set to 192.168.0.xx (xx is
the UNIT ID).
down
DIP switch 7 and 8
Set the IP address using the MMP1 Editor.
.
up
.
down
.
.