Setcolor - HP 16500C Programmer's Manual

SETColor

Command :SETColor {<color>,<hue>,<sat>,<lum>|DEFault}
The SETColor command is used to change one of the color selections on the
CRT, or to return to the default screen colors. Four parameters are sent with
the command to change a color:
•
•
•
•
An integer from 1 to 7
<color>
An integer from 0 to 100
<hue>
An integer from 0 to 100
<sat>
An integer from 0 to 100
<lum>
Color Number 0 cannot be changed.
Example
OUTPUT XXX;":SETCOLOR 3,60,100,60"
OUTPUT XXX;":SETC DEFAULT"
Color Number (first parameter)
Hue (second parameter)
Saturation (third parameter)
Luminosity (last parameter)
Mainframe Commands
SETColor
10–23