When you first plug in your projector, the built-in software will automatically run. Select “Run AcerDetection.exe” to complete installation. If the software does not auto run, open your file manager and click on the “Acer DisplayPal” drive and click on the “Acer DisplayPal_Setup.exe” to complete the installation.
Page 2
3. Running Acer DisplayPal Double-click on the Acer DisplayPal icon on your Windows Desktop to launch the Acer DisplayPal application. You will be presented with a dialog box asking you to select the number of USB...
Page 3
Extended) and also have 4 power modes (Low, Middle, High, and Turbo). Note: Plug 2 USB connector into you notebook and it should be on the same side. High and Turbo mode are recommended if you use Acer notebooks Acer Notebook Non-Acer Notebook...