Canon Finisher-R1 Service Manual page 47

Jam Type Sensor
Feed path PI34
sensor
delay
Feed path PI34
sensor
stationary
Timing PI33
Staple PI50
Power-on PI33,PI34
Door open PI31,PI32,
MS31
Jam Condition
When the feed path sensor (PI34) does not detect
paper after prescribed time (distance) has
elapsed since the inlet sensor (PI33) detected
paper.
When paper does not exit the feed path sensor
(PI34) after delivering for a prescribed time
(distance) after the delivery sensor (PI34) has
detected paper.
When the inlet sensor (PI33) detects paper
before receiving a delivery signal from the host
machine.
When the staple motor (M41) is rotated forward
and the staple home position sensor (PI50) does
not turn on within prescribed time after it is
turned off and the staple motor (M41) is rotated
backward and the staple home position sensor
(PI50) turns on within prescribed time.
When paper is detected by the inlet sensor (PI33)
or the delivery path sensor (PI34) during power
on.
When the upper cover open/close sensor (PI31),
front cover open/close sensor (PI32), or the front
cover close detect switch (MS31) detects that the
cover is opened.
Chapter 2
Code
1004
1104
1200
1500
1300
1400
2-23