Canon BW PCL PRINTER KIT-J1 Service Manual
Hide thumbs
Also See for BW PCL PRINTER KIT-J1:
- Installation procedure (6 pages) ,
- Installation procedure (16 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Canon BW PCL PRINTER KIT-J1
Summary of Contents for Canon BW PCL PRINTER KIT-J1
- Page 1 Service Manual Canon BW PCL PRINTER KIT-J1 Sep 14 2005...
- Page 3 Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.
- Page 4 Introduction Symbols Used This documentation uses the following symbols to indicate special information: Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requiring care to avoid combustion (fire). Indicates an item prohibiting disassembly to avoid electric shocks or problems.
- Page 5 Introduction The following rules apply throughout this Service Manual: 1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer- ence to the timing of operation. In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow indicates the direction of the electric signal.
-
Page 7: Table Of Contents
Contents Contents Chapter 1 Specifications 1.1 Product composition............................1- 1 1.1.1 Operating conditions of Hardware (LCD)..................... 1- 1 1.1.2 ROM for starting PCL (LCD) ........................1- 2 1.2 Specifications ..............................1- 2 1.2.1 PCL Printer Driver............................ 1- 2 1.2.2 Specifications ............................1- 3 Chapter 2 Installation 2.1 Checking components ........................... -
Page 9: Chapter 1 Specifications
Chapter 1 Specifications... - Page 11 Contents Contents 1.1 Product composition............................1-1 1.1.1 Operating conditions of Hardware (LCD)....................1-1 1.1.2 ROM for starting PCL (LCD) ........................1-2 1.2 Specifications ..............................1-2 1.2.1 PCL Printer Driver ............................1-2 1.2.2 Specifications .............................. 1-3...
-
Page 13: Product Composition
Chapter 1 1.1 Product composition 1.1.1 Operating conditions of Hardware (LCD) 0011-1136 -A resolution of UFRII LT can be set to either 600 dpi (128MB) or 600/1200dpi (256MB) depending on the memory installed. The 256MB RAM bundled with the PCL_PRINTER_KIT-J1kit is the same one as a 256MB RAM, which is set as iR 256MB Expansion RAM-D1(0449B001AA). -License authentication is not necessarily conducted at the time of installation. -
Page 14: Rom For Starting Pcl (Lcd)
Chapter 1 iR2020(Upgradeable Model) T-1-3 20ppm Copy Copy/Print Merchandise control iR2020 iR2020 iR2020 KR iR2020 iR2020 230V iR2020 iR2020 name EUR 230V AU 230V 220V 120V CN 220V TW 120V Point of destination EUR/Saudi FRAN Canada CSPL Product number of main F18-8993 F18-8963 F18-8934... -
Page 15: Specifications
Chapter 1 MONARCH 98.4 190.5 C5 ISO 162.0 229.0 B5 ISO 176.0 250.0 110.0 220.0 Non-default paper T-1-5 Non-default paper iR2020/2016 Minimum 95.0 x 148.0 mm Maximum 297.0 x 431.8 mm Supported Paper Types T-1-6 Paper Type Paper Size PLAIN A3, B4, A4/A4R, B5/B5R, A5/A5R, 11x17, LGL, LTR/LTRR, STMT/STMTR, EXEC, Local standard, Custom paper COLOR RECYCLED... -
Page 17: Chapter 2 Installation
Chapter 2 Installation... - Page 19 Contents Contents 2.1 Checking components ............................2-1 2.1.1 Checking the Contents..........................2-1 2.2 Installation procedure ............................2-1 2.2.1 Mounting to the Host Machine........................2-1 2.2.2 Checking the Connection ..........................2-6...
-
Page 21: Checking Components
Chapter 2 2.1 Checking components 2.1.1 Checking the Contents 0010-7372 F-2-1 32MB ROM 1 pc. 256MB RAM 1 pc. Screw (binding; M3X4) 1 pc. User software CD-ROM 1 pc. Release Note 1 pc. User's Manual CD-ROM 1 pc. 2.2 Installation procedure 2.2.1 Mounting to the Host Machine 0010-7632 1) Turn off the main power switch, and disconnect the power plug. - Page 22 Chapter 2 F-2-3 4) If a Super G3 Fax Board-T1 is found, disconnect the connector [1] of the IP-modem cable. If an optional Super G3 Fax Board-T1 is found, the SDRAM and the super capacitor remain powered to back up the image memory (even after the main power switch has been turned off and the power plug has been disconnected).
- Page 23 Chapter 2 7-1) Remove the LAN cover [1]. - 4 screws [2] F-2-7 7-2) Disconnect the connector [1] of the IP-LAN cable. - 1 wire saddle [2] - IP-LAN cable [3] F-2-8 8) Disconnect the soft ID cable [1]. - 1 cable clamp [2] F-2-9 9) Release the claw [1] of the cable guide, and free the cable guide [2] in upward direction.
- Page 24 Chapter 2 F-2-10 10) Remove the IP cover [1]. - 10 screws [2] F-2-11 11) Shift the 2 locking levers [1] back to their initial position. F-2-12 12) Connect the connector [1] of the 32MB ROM to the connector [2] of the IP PCB. - 1 screw (binding;...
- Page 25 Chapter 2 When attaching the IP cover, take care not to damage the grounding plate [2] by the USB port [1]. Also, after attaching the IP cover, check to make sure that the grounding plate is in firm contact with the USB port. F-2-14 14) Put all the parts that you have removed back in place.
-
Page 26: Checking The Connection
Chapter 2 17) Put back the parts that have been removed. - RAM cover - the connector of the IP-modem cable (if a Super G3 Fax Board-T1 is mounted) - rear left cover - rear cover 18) Connect the power plug, and turn on the main power switch. 2.2.2 Checking the Connection 0010-7789 When you have installed the kit, go through the following to make sure that it is properly recognized:... - Page 27 Sep 14 2005...