Display; Teletext; Tv Recording Function - Pioneer GEX-2850DVB2 Operation Manual

Display

To set the mode of display
 Touch Panel:
1. Press [ ] icon to entry
display mode.
2. Press [UP]/[DOWN] icons
to scroll up/down the display item.
3. Press [ ] icon to enter the editing menu for a chosen display.
 Remote Control:
1. Using [VOL]/[VOL] buttons, browse TV menu to highlight
the "Display" option. Press [OK] button to enter "Display" menu.
2. Press [CH]/[CH] buttons scroll up/down the display item.
3. Press [OK] button to enter the editing menu for a chosen display.

Teletext

To enter the teletext menu
 Touch Panel:
1. Press [ ] icon to entry
Teletext mode.
2. Press desired page of icon to
view the previous and next page.
3. Press [ ] icon to exit.
 Remote Control:
1. Using [VOL]/[VOL] buttons to highlight the "Teletext" option.
2. Press [OK] button to enter "Teletext" menu.
3. Press [CH] button to view next page or [CH] to view
previous page. Press numerical key button to jump to the specific
teletext page.
4. Press [MENU]/[EXIT] to leave.

TV Recording Function

1. In TV mode, press [REC] to start recording TV programs. When
unit is started recording,
left screen & the timer menu (disappear in 10 sec without control)
will appear on the lower left screen simultaneously.
2. Recorded TV programs can be played back in Movie mode.
NOTE:
a. Please ensure that a USB Storage device is connected to the
unit before recording.
b. While turn off the ACC/IGN, the unit will continue recording if
recording time has not endedt. The unit will automatically turn off
when the recording is finished.
Important notes:
i. A recorded program will be stored in a default folder named as
"Recorded_TV". The file types will be ".tsv" file for TV program.
ii. Maximum file size of FAT/FAT32 is 4 GB, files will be split
automatically.
iii. 1 GB storage can record approximately 45 minutes.
iv. Storage system supports FAT/FAT32/NTFS format.
v. Generally, all USB 2.0 can be used as recorded file storage. It's
recommended to format the USB storage device before it's
inserted into the in-car TV receiver unit.
WARNING! Please do not edit the "*.PLT" & "RECORD.TMP" files.
Modifying/deleting this file will cause error on recorded file.
14
icon will appear on the upper