LG DX130 Service Manual page 31

Step 3: Make sure the USB cable is firmly attached between projector and computer; the power switch is
in ON position and projector is in STAND BY mode.
<Down>, <Up>, <Right>, <Up>
Press
lamp LED will blink and the Flash-Tool mode will be enabled.
Note: The Windows hardware wizard will pop up if it is the first time use the Flash-Tool function, just select the
recommended options and let windows wizard do it automatically...
Company Confidential
key in sequence on keypad or IR remote controller , The power and
LG_______________________
30
Rev. 09
Projector
information
Delta____________
2006/09/14