GE VMIVME-7805 Hardware Reference Manual page 68

B.7 Chipset Setup
68 VMIVME-7805/VME-7805RC Hardware Reference Manual
Select the various options for chipsets located in the system (for example, the CPU
configuration and configurations for the North and South Bridge). The settings
for the chipsets are processor dependent and care must be used when changing
settings from the defaults set at the factory. Below is a sample of the Chipset Setup
screen; the actual options on your system may vary.
NOTE
Changes in this screen can cause the system to malfunction. If problems are noted after changes
have been made, reboot the system and access the BIOS. From the Exit menu select '
' and reboot the system. If the system failure prevents access to the BIOS screens, refer to
Defaults
Chapter One for instructions on clearing the CMOS.
Main Advanced
Advanced Chipset Settings
WARNING: Setting wrong values in below section
may cause system to malfunction.
NorthBridge Configuration
SouthBridge Configuration
CPCI (HINT HB6) Bridge Configuration
Lan (8254EB) Port Routing Options
BIOS SETUP UTILITY
PCIPnP Boot Security
002.53 (C) Copyright 1985-2002, American Megatrends, Inc.
Load Failsafe
Chipset Exit
NorthBridge chipset
Configuration options.
←→
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit