Advertisement
4. FCC INFORMATION
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
The Active Key modem board is designed to be installed in specific identified host units in portable applications (used closer
than 20cm to the body). In order to satisfy FCC rules conditions each modem installation must meet the following conditions:
The integral antenna design of the modem board cannot be changed.
The installer must ensure that when the modem is fitted in its final installation the ERP at 850MHz operation must not exceed
+33dBm, and at 1900MHz operation the EIRP must not exceed +30dBm.
Each host installation must comply with the FCC Specific Absorption Rate (SAR) requirements and the intentional emissions
to FCC Part 15, together with the appropriate warning text added to the user information.
The modem cannot be operated or co located in conjunction with any other antenna or transmitter.
A certification request must be filed with the FCC for each new host installation, which must include the test results taken.
If the FCC ID for the modem is not visible when installed in its host platform, then the integrator must place a label on the
exterior of the host platform identifying the modem with FCC ID used.
Violation of the above will invalidate the RF exposure rules.
ActiveKEY Modem User Manual
Page - 4 - of 5
Classification: GE Public
Advertisement
