Bosch DIVAR NETWORK 2000 Technical Notes page 9

Security Systems
From
ST-VS/MKP-L3
DIVAR APP - Configuring Streaming on Sony Cameras:
When the DIVAR APP is used with the DIVAR network recorder, a second, lower bit rate stream
is used for the APP viewer.
In Sony cameras, only one stream is enabled by default so to use the APP a second stream
must be enabled; follow the process below:
- In the camera's setup menu, select Video/Audio and Video Codec.
- Enable Image 2 as shown below. Then press OK. The stream should then be available
in the DIVAR APP.
Our Reference Tel
n.a.
Eindhoven
8 November 2017
Page 9 of 11