Huawei VR2 Quick Start Manual page 3

The different states of the indicator light are as follows:













Issue ()
Flashing red: The battery is extremely low. It will not work when connected with a phone and needs
to be charged.
Steady red: The battery is low. It will soon not work when connected with a phone and needs to be
charged soon.
Steady yellow: The battery power level is in the middle.
Steady green: The battery power level is high.
Flashing green: The firmware of the VR glasses is upgrading. Please do not disconnect the VR
glasses from the phone.
Off: There is an improper connection, a malfunction, or a problem with the battery. In such cases,
you should try pressing the Reset button to restart the VR glasses.
When using the VR glasses, try to avoid making excessive movements that might cause them to fall
off.
The VR glasses employ an air convection design that significantly reduces the chance of them
steaming up. However, to ensure the best possible experience, you should ensure that your face is
dry and clean under the VR glasses.
You can use the VR glasses over your ordinary glasses.
The VR glasses must be connected with a phone to work. Please consult the retailer or the official
Huawei Consumer BG website for details of supported devices.
The VR glasses' connection method here uses connection with a phone as the example. If you want
to later connect with a different device, please consult the retailer or log in to the Huawei Consumer
BG official website.
You can remove and clean the sponge in the visor after a period of use. It can be cleaned with a tiny
amount of detergent and then rinsed under clear water.
The VR glasses are powered by an internal lithium battery (that can be charged through its USB
Type-C port); the controller uses two AAA batteries.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Appearance
2