Table of Contents
Advertisement
• When setting switches on circuit card
• When carrying circuit card
The symbol shown in
Figure 3-2
work, the installer must be careful not to cause damage by static electricity.
CHAPTER 3
Page 14
Revision 2.0
CIRCUIT
CARD
CIRCUIT
CARD
Figure 3-1
Static Electricity Guard (Continued)
designates procedures in which circuit cards are handled. When engaging in such
ATTENTION
Figure 3-2
Static-Sensitive Attention Symbol
Wear a wrist strap and perform work on a grounded
conductive work surface.
CONDUCTIVE
POLYETHYLENE
BAG
Contents
Static Sensitive
Handling
Precautions Required
ND-46550 (E)
When carrying a circuit card around,
keep the card in a conductive
polyethylene bag.
Advertisement
Table of Contents
