Kenwood TK-5810H Service Manual page 21

Transmitter Section
Item Condition
2. Max [Panel test mode]
power 1) CH-Sig:1-1
adjust PTT:ON
•TK-5810H K
•TK-5810H K2 1) CH-Sig:1-1
PTT:ON
3. High power [Panel tuning mode]
adjust 1) Adj item:[W HPW]
Adjust:[***]
•TK-5810H K 2) Adj item:[WL HPW]t
[WLC HPW]t[WC HPW]t
[WCH HPW]t[WH HPW]
•TK-5810H K2 Adjust:[***]
PTT:ON
Press [PF5] to store the adjust-
ment value after adjustment.
4. Low power 1) Adj item:[W LPW]
adjust Adjust:[***]
•TK-5810H K 2) Adj item:[WL LPW]t
[WLC LPW]t[WC LPW]t
[WCH LPW]t[WH LPW]
Adjust:[***]
•TK-5810H K2 PTT:ON
Press [PF5] to store the adjust-
ment value after adjustment.
Receiver Section
Item Condition
1. RX [Panel tuning mode]
Front-end 1) Adj item:[W FEND]
adjust Adjust:[***]
2) Adj item:[WL FEND]t
[WLC FEND]t[WC FEND]t
[WCH FEND]t[WH FEND]
ADJUSTMENT
(For other adjustments, refer to TK-5810(B)(B51-8780-00 service manual).)
Measurement
Test-
Unit
equipment
Power
meter
Ammeter
Measurement
Test-
Unit
equipment
SSG Rear
panel
Adjustment
Terminal Unit Parts
Final VR1
Front [PF3],
panel [PF4]
Adjustment
Terminal Unit Parts
ANT Front [PF3], Enter the following Note: After replacing the
panel [PF4] adjustment values
to the transceiver
by pressing [PF3]
and [PF4] keys.
[WL FEND] : 210 K
[WLC FEND] : 175 K
[WC FEND] : 130 K
[WCH FEND] : 95 K
[WH FEND] : 65 K
After setting the
adjustment value,
press [PF5] key.
The adjustment
value will be stored
in memory.
TK-5810H
Specifications/Remarks
Method
107W ±2W
[WL HPW] :100W ±1W
[WLC HPW] :100W 28A or less
[WC HPW] :100W
[WLH HPW] :100W
[WH HPW] : 60W
100W ±1W
28A or less
50W ±1W
15A or less
Specifications/Remarks
Method
EEPROM (IC701)
align RX Front-end.
: 205 K2
: 155 K2
: 115 K2
: 80 K2
: 50 K2
( )
B
21