Preparing For A Videoconference With The Ipela Vc Link Function - Sony IPELA PCS-G50 Manual

Connecting to an external server with the IPELA VC Link
function enables you to use the IPELA VC Link service.
This guide describes the procedures and settings needed to
use the IPELA VC Link service.
IPELA VC Link service is only available in Japan.
For more about the IPELA VC Link service, consult your
Sony dealer.
Preparing for a
Videoconference With the
IPELA VC Link Function
For details on IPELA VC Link settings, see "Details of
IPELA VC Link Setup" (page 4).
1
After entering an extension command with "Function
Extension Command" in Other Settings of the
Administrator Setup menu, select "Save," then press
the ENTER button on the Remote Commander.
Administrator Setup
Other Settings
Page: 1/ 1
Web Monitor
Web Access
Save Setup
Load Setup
Function Extension Command
The screen switches to the Setup menu.
Notes
• For details on obtaining the "Function Extension
Command," consult your Sony dealer.
• If the "SIP Server Mode" setting is set to "On" on the
SIP Setup menu, an error message appears, and
IPELA VC Link does not activate. Set "SIP Server
Mode" to "Off" before entering the "Function
Extension Command" again.
• The SIP Setup menu is displayed when the optional
SIP software has been installed.
2
With the "IPELA VC Link" is selected, press the
ENTER button.
Dial
Communication
Audio
General
LAN
Information
IPELA VC Link

Preparing for a Videoconference With the IPELA VC Link Function

Off
Disabled
Save Cancel
Setup
Answer
Status
Video
Administrator
ISDN
Encryption
2