Siemens SINUMERIK 840D pl Manual page 49

The following files are edited:
● /usr/local/apache2/conf/httpd.conf
● /usr/local/apache2/conf/extra/httpd-ssl.conf
● /usr/local/apache2/conf/extra/httpd-vhosts.conf
Editing httpd.conf
Enter the following lines:
Listen 8082
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule autoindex_module modules/mod_autoindex.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule dir_module modules/mod_dir.so
#ServerAdmin you@example.com
ServerName localhost
Include conf/extra/httpd-vhosts.conf
Include conf/extra/httpd-ssl.conf
Inserting the supplement for the company proxy
If a company proxy is used in your company, you must insert an additional line in the
configuration.
Example:
● Proxy: 123.124.125.126
● Proxy port: 4321
Add the following line at the end of the file:
● httpd.conf:
ProxyRemote * http://123.124.125.126:4321
Note
Proxy authorization in the proxy remote
Proxy authorization is not supported in the remote proxy in the current Apache version. It
could possibly be implemented by Apache in a future release.
If you require this function for your application, you will find one possible solution at the
following link:
Proxy authorization (https://bz.apache.org/bugzilla/show_bug.cgi?id=37355)
Manage MyMachines /Remote - installation in existing control environments
Application examples, 10/2018, A5E45211403B AB
Installation/configuration
4.5 SIMATIC IoT2040
49