Ordering Information - Siemens SITRANS RD500 Operating Instructions Manual

SOFTWARE / UNIT OPERATION
CONFIGURING A SITRANS RD500 HSPA+
MODEM OPTION CARD
The RD500 Modem is configured as part of the RD500 system, using a
standard web browser. All modem option cards are configured to US HSPA+
frequency band (850/1900 MHz) by default. During setup of the Cellular
Modem Option card, the appropriate HSPA+ frequency band must be chosen
depending on the geographical location of the SITRANS RD500. Once the
option card is configured, the SITRANS RD500 should be power cycled for
the configuration changes to take effect. Additional information can be found
in your SITRANS RD500 hardware bulletin.
LED
LINK STATUS – MODEM STATUS LED
The Link Status LED is a green LED that provides information regarding
the state of the modem module's cellular connection. The status is described
below.
OFF No power to the unit
Powered and not registered on the cellular
ON
network.
BLINKING Powered and registered on the cellular network.
SIM CARD INSTALLATION & DETAILS
A SIM Card has to be installed on the option card before installing the
option card in the SITRANS RD500.

ORDERING INFORMATION

TYPE
Master Module
Option Card
Page 6
DESCRIPTION
SITRANS RD500 Master with multiple protocol converter,
data logger, web server with Virtual HMI up to QVGA (320
x 240) size and expansion slot.
HSPA+ Cell Modem Option Card
SITRANS RD500
TECHNICAL SUPPORT
Support is available 24 hours a day.
To find your local Siemens Automation Office address, phone or fax
number go to:
www.siemens.com/automation/partner
Click on the tab Contacts by Product and then find your product group
(+Process Automation > +Weighing Technology).
Select the team Technical Support. Click on Next.
Click on the appropriate continent, then select the country followed by
the city. Click on Next.
For on-line technical support go to:
www.siemens.com/automation/support-request
Enter the device name (MD-256) or order number, then click on Search,
and select the appropriate product type. Click on Next. You will be prompted
to enter a keyword describing your issue. Then either browse the relevant
documentation, or click on Next to email a detailed description of your issue
to Siemens Technical Support staff.
Siemens A&D Technical Support Center:
phone +49 180 50 50 222
fax +49 180 50 50 223
PART NUMBER
7ML5750-1AA000
7ML19301EY
7ML19985MM01