Wlan Adapter Installation (For Authorized Service Personnel Only) - Fujitsu UTY-TFNXZ1 Setting Manual

10. WLAN ADAPTER INSTALLATION
(For authorized service personnel only)
10.1. Before installing the WLAN adapter
• For the air conditioner to operate satisfactorily, install it as outlined in this installation manual.
• Installation work must be performed in accordance with national wiring standards by
authorized personnel only.
• Do not bundle the WLAN adapter wiring with the connection cable running between the
indoor and outdoor units, or the power supply cable.
• Install the WLAN adapter near the wireless router. (The connection will become unstable
if it is placed further away, which will make using the system more difficult.)
• Install the WLAN adapter between the indoor unit and wireless router.
• Certain types of wall materials may shut out wireless communications.
• Do not touch the heat exchanger.
• During installation or removal, do not have the wire caught by any parts nor pull it hard.
It may result in malfunction of the air conditioner.
• Please do not install the WLAN adapter in the following places. Otherwise, radio com-
munication may be interfered.
- Places exposed to direct sunlight
- Places subject to extremely high and low temperatures, such as near the outlet port of
the air conditioner main body
- Near the air conditioner air inlet or outlet
- Places with high humidity
- Places near moving parts of the air conditioner main body
- Places near the bottom of the air conditioner main body
- Inside or on the side of the air conditioner main body
- Near microwave ovens
- Within 1 m (40 in) of a TV or radio
- Places in the reach of children
- Near automatic control devices such as automatic door sensors or fire detectors
- Places with oil, vapour or flammable gases
- Near medical equipment, pacemakers, defibrillators or other devices
- Places where the WLAN adapter could get wet, such as in the bathroom
- Places where the WLAN adapter is difficult to access for maintenance
• Please install the WLAN adapter in a place where the switches and buttons can be
operated and where the LED display can be confirmed. (In the areas shown below.)
En-16
WARNING
CAUTION